AirTAC GFC600-20 Combination Unit (GFC60020MC1)
The AirTAC AirTAC GFC600-20 Combination Unit (GFC60020MC1) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT3/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-20 Combination Unit (GFC60020MC1)
The AirTAC GFC60020MC1 is a two-unit air preparation set: a filter regulator plus a separate lubricator, so one assembly removes water and particulate, regulates downstream pressure and meters oil mist to the circuit. This 600-size unit has 3/4 in PT ports, the standard 40 um filter element, a manual drain you operate by hand, and a round pressure gauge reading in MPa. Maximum working pressure is 1.0 MPa (145 psi); with the manual drain, the regulator adjustment range is 0.05-0.9 MPa (7-130 psi).
This is a genuine AirTAC part. The G series covers sizes 200 to 600 with ports from 1/8 in to 1 in, 40 um or 5 um filter elements, differential-pressure, automatic or manual drains, embedded square gauges or external round gauges in MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so we confirm the datasheet figures on request.
AirTAC GFC600-20 Combination Unit (GFC60020MC1) Technical Specifications
| Model | AirTAC GFC600-20 Combination Unit (GFC60020MC1) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-20 Combination Unit (GFC60020MC1)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-20 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-20 Combination Unit (GFC60020MC1) Is Used
Maintenance workshop tool bench
Supplies filtered, regulated and lubricated air to a workshop bench where impact guns and ratchets are used in shifts, with manual drainage done during end-of-day checks.
Contractor site compressor set-up
Prepares air at the outlet of a site compressor feeding nailers and staplers, with the 3/4 in ports matching the site hose main and the round gauge easy to read outdoors.
Press-shop fixture clamping circuit
Conditions the air to pneumatic clamps on a weld fixture, keeping the regulated set point within the wide 0.05-0.9 MPa adjustment range that the manual-drain version allows.
Is the AirTAC GFC600-20 Combination Unit (GFC60020MC1) the Right Set?
The 600 size carries 3/4 in PT ports, so pick it when your main and flow demand sit a step above the 400 size. The M in this code means a manual drain: staff must bleed the bowl periodically, which suits attended installations, while A (automatic) and blank (differential-pressure) versions drain with less intervention. The element is the standard 40 um grade; order the W version for 5 um filtration. This set carries the external round gauge with an MPa scale, and psi (2) or bar (3) scales are alternatives. The manual drain also widens the regulator adjustment range to 0.05-0.9 MPa (7-130 psi). Threads are PT as standard with G and NPT to order. Flow appears only as curves, so ask us to confirm sizing from the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT3/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.
AirTAC GFC600-20 Combination Unit (GFC60020MC1) FAQ
Flow for the G series is published as curves across the pressure range, not as a single rated figure, so no number is quoted here. Send us your pressure and consumption figures and we will confirm the sizing from the datasheet on request.
The M code means the bowl is emptied by hand, which fits installations that are checked regularly; automatic (A) and differential-pressure (blank) drains are catalogue alternatives. With a manual drain the regulator adjustment range is 0.05-0.9 MPa (7-130 psi), wider than the 0.15-0.9 MPa range of the auto and differential-pressure versions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-20 Combination Unit (GFC60020MC1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.