AirTAC GFC600-20 Combination Unit (GFC60020MNW)
The AirTAC AirTAC GFC600-20 Combination Unit (GFC60020MNW) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT3/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialAluminium alloy
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-20 Combination Unit (GFC60020MNW)
The AirTAC GFC series is a two-unit air-preparation set: a filter regulator paired with a lubricator, covering filtration, pressure regulation and oil-mist lubrication on one line. This code is the 600 size with a 3/4 in PT port, a manual-drain filter bowl and a 5 um element, ordered without a gauge (the N in the code). The 600-size bowls are aluminium alloy. Maximum working pressure is 1.0 MPa (145 psi), and with the manual drain the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi).
It is a genuine AirTAC part across the G-series range of 200, 300, 400 and 600 sizes, with differential-pressure, automatic or manual drainage, 40 um standard or 5 um fine filtration, and PT, G (BSPP) or NPT threads. Operating temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm flow and datasheet figures on request.
AirTAC GFC600-20 Combination Unit (GFC60020MNW) Technical Specifications
| Model | AirTAC GFC600-20 Combination Unit (GFC60020MNW) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-20 Combination Unit (GFC60020MNW)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-20 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-20 Combination Unit (GFC60020MNW) Is Used
Fleet maintenance garage air rings
Serves the overhead air drops in a truck or trailer maintenance garage, giving technicians filtered, regulated, lubricated air for tools and jacks at a set pressure.
Assembly bench circuits
Prepares the air at multi-operator assembly benches where nutrunners and air cylinders share one 3/4 in supply, with the 5 um element protecting the tools.
Actuator test rigs
Conditions the supply on a pneumatics test rig where a 5 um element and stable regulated pressure matter, and where the rig carries its own instrumentation instead of a unit gauge.
Is the AirTAC GFC600-20 Combination Unit (GFC60020MNW) the Right Set?
Choose the size to match your line: 200, 300, 400 and 600 with ports from 1/8 in up to 1 in; this is the 600 size on 3/4 in PT. Drainage on the filter bowl is manual here (M), which widens the regulator window to 0.05-0.9 MPa (7-130 psi); automatic and differential-pressure drains are the other codes. The element is the 5 um fine grade (W); 40 um is standard. Gauge choice is made in the code: N means no gauge, while C and F codes select round or square gauges with MPa, psi or bar scales. PT is the standard thread with G (BSPP) and NPT as order options, and a bracket can be specified.
Flow is published as curves rather than a single rated number, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.
AirTAC GFC600-20 Combination Unit (GFC60020MNW) FAQ
We confirm flow from the datasheet on request, because AirTAC publishes flow for this series as curves rather than a single rated figure. Give us your line pressure and the air your equipment consumes, and we will check this 600-size, 3/4 in set against the application before you order.
No - the N in the code means the set is supplied without a gauge. Gauge selection is made in the code when ordering: N for none, or C and F codes for round or square gauges with MPa, psi or bar scales. Everything else decodes as the 600 size, 3/4 in PT port, manual drain and 5 um element.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-20 Combination Unit (GFC60020MNW)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.