AirTAC GFC600-25 Combination Unit (GFC60025AC1W)
The AirTAC AirTAC GFC600-25 Combination Unit (GFC60025AC1W) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-25 Combination Unit (GFC60025AC1W)
The AirTAC GFC series is a two-unit air preparation set: a filter-regulator body paired with a lubricator, giving filtration, pressure regulation and oil-mist lubrication in one assembly. This configuration is the size 600 set with a 1 in. PT port, an automatic drain on the bowl, a fine 5 um filter element and an external round pressure gauge scaled in MPa. With automatic drain, the regulator adjusts across 0.15-0.9 MPa (20-130 psi) and the unit handles inlet pressures up to 1.0 MPa (145 psi) at 5-70 C, non-freezing. At size 600 the filter-regulator bowl is aluminium alloy.
This is a genuine AirTAC part. The GFC series is offered in sizes 200, 300, 400 and 600 with ports from 1/8 in. to 1 in., with manual, automatic or differential-pressure drains, 40 um or 5 um elements, and gauge choices by scale. Because flow is published as curves rather than a single rating, we confirm the datasheet figures for your application on request.
AirTAC GFC600-25 Combination Unit (GFC60025AC1W) Technical Specifications
| Model | AirTAC GFC600-25 Combination Unit (GFC60025AC1W) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-25 Combination Unit (GFC60025AC1W)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-25 Combination Unit (GFC60025AC1W) Is Used
Metal stamping press air line
Prepares and lubricates the air feeding clutch, counterbalance and part-ejection cylinders on a mechanical stamping press, with the 5 um element protecting precision valves on a 1 in. supply header.
Bottling line actuator supply
Filters, regulates and lubricates the compressed air running grippers and capping heads on a beverage bottling line, with automatic drain handling condensate from a long compressed-air run.
Truck assembly torque tools
Serves as main-line air preparation and oil feed for pneumatic torque wrenches and lift-assist balancers at a commercial-vehicle assembly station, keeping tools lubricated through double shifts.
Is the AirTAC GFC600-25 Combination Unit (GFC60025AC1W) the Right Set?
Start with the port: this set is 1 in. PT, the largest step in the GFC range, so match it to a main air line feeding several high-consumption stations. The 5 um element suits clean, dry points such as instrument air; choose 40 um where coarser protection is enough. The automatic drain clears condensate without daily attention, and the round MPa gauge gives a clear local reading. PT is the standard thread; G (BSPP) and NPT versions are catalogue options you can order. Flow in the G series is published as curves, not a single rated figure, so ask us to confirm sizing against your demand profile before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC GFC600-25 Combination Unit (GFC60025AC1W) FAQ
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so there is no one number we can quote honestly. Tell us your line pressure and expected air demand and we will confirm the sizing from the datasheet on request before you order.
The W in the code sets the fine 5 um filter grade instead of the standard 40 um, and A sets the automatic drain, which ejects condensate as it accumulates. The regulator range with automatic drain is 0.15-0.9 MPa (20-130 psi). If you prefer manual draining or the coarser 40 um element, those are separate GFC order codes we can supply.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025AC1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.