AirTAC GFC600-25 Combination Unit (GFC60025AC3)
The AirTAC AirTAC GFC600-25 Combination Unit (GFC60025AC3) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainAutomatic drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-25 Combination Unit (GFC60025AC3)
The AirTAC GFC series is a two-unit air preparation set that pairs a filter-regulator with a lubricator, so one assembly filters, regulates and oil-mist lubricates the compressed air. This version is the size 600 set with a 1 in. PT port, automatic drain, the standard 40 um filter element and an external round pressure gauge scaled in bar. With automatic drain the regulator adjusts 0.15-0.9 MPa (20-130 psi), inlet pressure can reach 1.0 MPa (145 psi), and the working temperature is -5 to 70 C, non-freezing. At size 600 the filter-regulator bowl is aluminium alloy.
This is a genuine AirTAC part. GFC sets come in sizes 200, 300, 400 and 600 with ports from 1/8 in. to 1 in., selectable drains, 40 um or 5 um elements, and MPa, psi or bar gauge scales. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
AirTAC GFC600-25 Combination Unit (GFC60025AC3) Technical Specifications
| Model | AirTAC GFC600-25 Combination Unit (GFC60025AC3) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-25 Combination Unit (GFC60025AC3)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-25 Combination Unit (GFC60025AC3) Is Used
Injection moulding shop services
Prepares and lubricates air for core-pull and ejector circuits on injection moulding machines, with the bar gauge matching the metric instrumentation used on European-built presses.
Water treatment valve actuators
Filters, regulates and oils the air supply to quarter-turn pneumatic valve actuators on a municipal water treatment train, where automatic draining suits a humid compressor room.
Steel service line clamping
Conditions the air feeding strip-clamping and table-rise cylinders at a steel service centre coil processing line, with the 40 um element protecting general-duty cylinder seals.
Is the AirTAC GFC600-25 Combination Unit (GFC60025AC3) the Right Set?
Take this code when you want the big 1 in. PT port, standard 40 um filtration and a round gauge reading in bar - common for plants specifying in metric units. The automatic drain handles condensate unattended, and the 20-130 psi (0.15-0.9 MPa) regulation window with automatic drain covers most general machinery settings. If you need the finer 5 um element, a psi or MPa gauge, a different drain, or a G/NPT thread, those exist as adjacent GFC codes. Because flow appears only as curves, ask us to confirm sizing against your actual demand before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC GFC600-25 Combination Unit (GFC60025AC3) FAQ
None that we can quote as a single number: AirTAC publishes G-series flow capacity as curves, not a rated figure. Give us your line pressure and air demand and we will confirm the datasheet figures on request, so the 1 in. port can be checked against your application before ordering.
A GFC set is two pieces: one combined filter-regulator body plus a separate lubricator, so it filters, regulates and lubricates in a more compact footprint. The GC series is three separate units - filter, regulator and lubricator - mounted in sequence. Both exist in size 600 with a 1 in. PT port, and this code additionally selects the automatic drain, 40 um element and bar-scale round gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025AC3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.