AirTAC GFC600-25 Combination Unit (GFC60025AF1W)
The AirTAC AirTAC GFC600-25 Combination Unit (GFC60025AF1W) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-25 Combination Unit (GFC60025AF1W)
The AirTAC GFC is a two-unit air-preparation set that combines a filter-regulator with a lubricator, so one assembly filters, regulates and oil-mists compressed air. This GFC60025AF1W is the size 600 configuration with a 1 in. PT (standard) port, an automatic drain, the 5 um fine filter element (the W code), and the embedded square gauge with an MPa scale. The 5 um element removes finer particulate than the standard 40 um grade, and the automatic drain clears condensate without operator attention.
This is a genuine AirTAC part. Across the G series you can choose sizes 200 to 600, the 40 um standard or 5 um (W) element, differential-pressure, automatic or manual drains, gauge and thread options, and an optional bracket. AirTAC publishes flow as curves rather than a single rated figure, so ask us and we will confirm the datasheet and flow figures on request.
AirTAC GFC600-25 Combination Unit (GFC60025AF1W) Technical Specifications
| Model | AirTAC GFC600-25 Combination Unit (GFC60025AF1W) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-25 Combination Unit (GFC60025AF1W)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-25 Combination Unit (GFC60025AF1W) Is Used
Laboratory automation air supply
Fine 5 um filtration with regulation and oil mist for the cylinders and actuators of an automated sample-handling cell in a testing laboratory.
SMT line support air
Prepares the air feeding board-handling and support pneumatics around an electronics SMT line, where the 5 um element keeps finer dust out of the circuit.
Trailer assembly air tools
Main-air preparation for assembly stations on a commercial-trailer line, supplying impact tools and clamp cylinders with regulated, lubricated air.
Is the AirTAC GFC600-25 Combination Unit (GFC60025AF1W) the Right Set?
This is the largest G-series step - size 600 with a 1 in. port - for main-air lines with substantial consumption; choose 400 (3/4 in.) or smaller where demand is light. The W in the code selects the 5 um element; use the plain AF1 code if the standard 40 um grade is enough for your tools and cylinders. The automatic drain is built in, with manual (M) and differential-pressure (blank) drains as other order codes.
The embedded square gauge reads in MPa; an external round gauge and psi or bar scales are available as options. PT is the standard thread; G (BSPP) and NPT are catalogue thread options, and a mounting bracket is optional. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC GFC600-25 Combination Unit (GFC60025AF1W) FAQ
Yes - on request. AirTAC publishes flow for the G series as curves rather than a single rated figure, so we do not state one here. Contact us with your application and we will confirm the datasheet and the relevant flow-curve data before you order.
The W code fits a 5 um element, which captures finer particulate than the standard 40 um grade - useful where downstream equipment is more sensitive to dust. If your application only needs basic protection for cylinders and air tools, the 40 um standard code (GFC60025AF1) is the simpler choice.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025AF1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.