AirTAC GFC600-25 Combination Unit (GFC60025AF1WK)
The AirTAC AirTAC GFC600-25 Combination Unit (GFC60025AF1WK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-25 Combination Unit (GFC60025AF1WK)
The AirTAC GFC is a two-unit air-preparation set combining a filter-regulator with a lubricator, so one assembly filters, regulates and oil-mists compressed air. This GFC60025AF1WK is the size 600 configuration with a 1 in. PT (standard) port, an automatic drain, the 5 um fine filter element (the W code), the embedded square MPa gauge, and a reverse (check) valve fitted (the K code). It combines fine filtration with backflow protection in one order code.
This is a genuine AirTAC part. The G series covers sizes 200 to 600 with 40 um standard or 5 um (W) elements, three drain types, the optional K check valve, gauge, thread and bracket choices. AirTAC publishes flow as curves rather than a single rated figure, so ask us and we will confirm the datasheet and flow figures on request.
AirTAC GFC600-25 Combination Unit (GFC60025AF1WK) Technical Specifications
| Model | AirTAC GFC600-25 Combination Unit (GFC60025AF1WK) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-25 Combination Unit (GFC60025AF1WK)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-25 Combination Unit (GFC60025AF1WK) Is Used
Robotic welding cell supply
Prepares air for weld-gun clamping cylinders on a robotic spot-welding cell, with 5 um filtration and the check valve holding the circuit against backflow.
Paint kitchen equipment feed
Filters, regulates and lubricates the air feeding agitators and transfer pumps in a paint-mix room, where the 5 um element limits fine contamination.
Multi-circuit packaging machine
Main-air preparation feeding several pneumatic circuits of a cartoning and wrapping machine, with automatic draining and check-valve protection at the entry point.
Is the AirTAC GFC600-25 Combination Unit (GFC60025AF1WK) the Right Set?
Take size 600 with the 1 in. port when your main-air consumption sits at the top of the G-series range; step down to 400 (3/4 in.) or below for lighter loads. This code pairs the W 5 um element with the K check valve - select it only if you need both fine filtration and backflow protection; drop W or K individually for simpler versions. The automatic drain clears condensate unattended, with manual (M) and differential-pressure (blank) drains as other codes.
The embedded square gauge reads in MPa; an external round gauge with psi or bar scales is an orderable option. PT is the standard thread, G (BSPP) and NPT are catalogue thread options, and a mounting bracket is optional. Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC GFC600-25 Combination Unit (GFC60025AF1WK) FAQ
AirTAC publishes flow for this series as curves, not as a single rated figure, so no number is quoted here. Share your application details and we will confirm the datasheet and the relevant flow-curve data on request so you can verify the 1 in. size against your demand before ordering.
W selects the 5 um fine filter element instead of the standard 40 um grade, and K adds a fitted reverse (check) valve to the set. Together they give finer particulate removal plus backflow protection in a single unit; if you need only one of the two, the W or K code alone is available.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025AF1WK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.