AirTAC GFC600-25 Combination Unit (GFC60025C1)
The AirTAC AirTAC GFC600-25 Combination Unit (GFC60025C1) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-25 Combination Unit (GFC60025C1)
The AirTAC GFC60025C1 is a genuine two-unit air-treatment set for compressed air only: a filter regulator plus a separate lubricator, so one unit removes water and particulate and holds downstream pressure while the other meters an oil mist into the air line. This size 600 configuration is built around 1 in. PT ports, a 40 um standard filter element, a differential-pressure drain on the filter bowl, and an external round pressure gauge scaled in MPa. At 600 size the filter bowl is aluminium alloy.
Maximum working (inlet) pressure is 1.0 MPa (145 psi). With the differential-pressure drain fitted, the regulator adjusts from 0.15 to 0.9 MPa (20 to 130 psi), and the operating temperature range is -5 to 70 C (non-freezing). AirTAC offers this series in 200, 300, 400 and 600 sizes, with G (BSPP) or NPT thread options, automatic or manual drains, a 5 um element, gauge choices and an optional reverse valve. Flow is published as curves rather than a single rating, so ask us to confirm figures from the datasheet for your application.
AirTAC GFC600-25 Combination Unit (GFC60025C1) Technical Specifications
| Model | AirTAC GFC600-25 Combination Unit (GFC60025C1) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-25 Combination Unit (GFC60025C1)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-25 Combination Unit (GFC60025C1) Is Used
Automotive plant air drops
Point-of-use treatment at a 1 in. main drop feeding impact wrenches and air ratchets: water and scale are stripped out, downstream pressure is held steady, and the lubricator feeds the tool line.
CNC machining cell supply
Filtered and regulated air to a machining cell's pneumatic clamps and tool changer, with an oil mist carried to the actuator circuit from the same two-unit set.
Bottling line actuator feed
A packaging line's valve manifold and cylinder bank drawing from one treatment point: clean, pressure-controlled air plus lubrication for the filler and capper pneumatics.
Is the AirTAC GFC600-25 Combination Unit (GFC60025C1) the Right Set?
Size 600 is the largest step in the G series, with 1 in. PT ports; step down to 400, 300 or 200 sizes with smaller ports if your demand is lower. Drain types are differential-pressure (this unit), automatic (A) or manual (M); the drain choice also sets the regulation window, with manual-drain versions allowing adjustment down to 0.05 MPa. The 40 um element is standard and a 5 um (W) element is available for finer filtration. Thread is PT as the standard, with G (BSPP) and NPT as catalogue options, and the C1 code means an external round gauge scaled in MPa. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC GFC600-25 Combination Unit (GFC60025C1) FAQ
AirTAC publishes flow for the G series as curves rather than a single rated number, so we do not quote a fixed figure here. Tell us your line pressure and air demand and we will confirm the relevant flow figures from the datasheet on request.
A differential-pressure drain is the default: it bleeds condensate automatically when the pressure differential across the filter is sufficient. If you prefer an automatic float drain, specify A in the code; for a manual drain, M. Note that with a manual drain the regulator adjustment range widens to 0.05-0.9 MPa (7-130 psi).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025C1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.