AirTAC GFC600-25 Combination Unit (GFC60025C2)
The AirTAC AirTAC GFC600-25 Combination Unit (GFC60025C2) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-25 Combination Unit (GFC60025C2)
The AirTAC GFC series combines a filter regulator and a lubricator in one two-piece set: compressed air is filtered, regulated and then carries a fine oil mist downstream to protect pneumatic cylinders and air tools. GFC60025C2 is the 600 size with 1 in. PT ports, a differential-pressure drain on the filter bowl, the standard 40 um filter element and a round pressure gauge with a psi scale. On the 600 size the bowls are aluminium alloy, the maximum working pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15-0.9 MPa (20-130 psi), and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFC family is offered in 200, 300, 400 and 600 sizes with ports from 1/8 in. to 1 in., and options include automatic, manual or differential-pressure drains, 40 um or 5 um filtration, MPa, psi or bar gauge scales, G (BSPP) or NPT thread versions and an optional mounting bracket. Flow is published as curves rather than a single rating, so we confirm the datasheet and sizing figures on request.
AirTAC GFC600-25 Combination Unit (GFC60025C2) Technical Specifications
| Model | AirTAC GFC600-25 Combination Unit (GFC60025C2) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-25 Combination Unit (GFC60025C2)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-25 Combination Unit (GFC60025C2) Is Used
Beverage bottling hall
Clean, regulated and lubricated air for the large stopper gates and conveyor cylinders on a bottle filler line, with the psi gauge readable at the line side.
Palletizing robot cell
Feed the gripper and clamp actuators on a case palletizer from a single set that filters the supply, holds the working pressure and mists oil for the cylinder seals.
Stamping press shop
Air preparation for clamp cylinders and scrap-chute pushers on an automotive stamping line, where the 1 in. ports feed a high-consumption header.
Is the AirTAC GFC600-25 Combination Unit (GFC60025C2) the Right Set?
Step up to the 600 size when your circuit draws the largest air demand: it carries 1 in. PT ports, the biggest in the GFC range, with the same 0.15-0.9 MPa (20-130 psi) regulation window as the smaller sizes. The differential-pressure drain on this model clears condensate during normal flow; automatic (A) and manual (M) drain versions are available as separate codes. The standard 40 um element suits most cylinder and tool circuits, while the W suffix gives a 5 um element. This code carries a round psi-scale gauge; square gauges and MPa or bar scales are alternatives, and PT can be ordered as G (BSPP) or NPT. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC GFC600-25 Combination Unit (GFC60025C2) FAQ
AirTAC publishes G-series flow as curves rather than a single rated figure, so there is no one rated flow number we can quote. Send us your line pressure and air demand and we will confirm the sizing against the datasheet on request before you order.
C identifies a round external pressure gauge and 2 sets its scale to psi. Square-gauge versions and MPa or bar scales are available as alternative codes, and the thread can be ordered in G (BSPP) or NPT instead of PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025C2)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.