AirTAC GFC600-25 Combination Unit (GFC60025F3)
The AirTAC AirTAC GFC600-25 Combination Unit (GFC60025F3) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-25 Combination Unit (GFC60025F3)
The AirTAC GFC series is a two-unit compressed-air treatment set: a filter regulator plus a separate lubricator, so one station removes water and particulate, sets downstream pressure and adds oil mist. This GFC60025F3 is built in size 600 with a 1 inch PT port, the standard 40 um filter element, a differential-pressure drain and an embedded square gauge reading in bar - the scale many European-built machines are specified in. Both bowls are aluminium alloy at size 600. Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFC family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, 40 um or 5 um filtration, differential-pressure, automatic or manual drains, MPa, psi or bar gauge scales in square or round style, and G (BSPP) or NPT thread options. Flow is published as curves rather than a single rating, so we confirm datasheet figures on request.
AirTAC GFC600-25 Combination Unit (GFC60025F3) Technical Specifications
| Model | AirTAC GFC600-25 Combination Unit (GFC60025F3) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-25 Combination Unit (GFC60025F3)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-25 Combination Unit (GFC60025F3) Is Used
European-built packaging machine inlet
Wrapping and filling machines built to European specification are usually read out in bar. This set with the square bar gauge fits the machine's 1 inch air-inlet panel and feeds filter-regulated-lubricated air to the valve island.
Material-handling conveyor gate supply
A distribution center's conveyor diverters and stopper gates run continuously on plant air. The 40 um element protects the directional valves from scale and water, while the regulator holds consistent gate speed and the lubricator conditions the cylinders.
Process laboratory utility air station
A process lab drawing utility air for stirrers, actuators and general pneumatic bench services uses this set at the wall drop: the standard 40 um grade for utility service, bar-scale gauge matching the lab's European instruments, and oil mist where air tools are used.
Is the AirTAC GFC600-25 Combination Unit (GFC60025F3) the Right Set?
The 40 um element here is the standard grade for general plant-air protection; order the 5 um (W) version where finer filtration is needed. With the default differential-pressure drain, the regulator setting range is 0.15-0.9 MPa (20-130 psi); automatic and manual drains are catalogue options. The embedded square gauge reads in bar; MPa or psi scales and an external round gauge can be ordered instead. Size 600 with a 1 inch PT port is the largest GFC step - drop to 400, 300 or 200 for smaller lines. PT is the standard thread, with G (BSPP) and NPT available to order. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC GFC600-25 Combination Unit (GFC60025F3) FAQ
AirTAC publishes flow for the G series as performance curves rather than a single rated number, so no rated flow figure is stated here. Share your line pressure, port size and demand and we will confirm the flow data from the datasheet on request.
The 40 um element (default in this code) is the standard grade for protecting valves, cylinders and general plant equipment. The 5 um W grade is the finer choice for applications such as blow-off nozzles, painting air or sensitive instrumentation. Both are decodable from the code - W after the gauge digits means 5 um.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025F3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.