AirTAC GFC600-25 Combination Unit (GFC60025MC1WK)
The AirTAC AirTAC GFC600-25 Combination Unit (GFC60025MC1WK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-25 Combination Unit (GFC60025MC1WK)
The AirTAC GFC series is a two-piece air preparation set: a filter-regulator plus a lubricator, paired to filter, regulate and oil-mist-lubricate compressed air at one station. This GFC60025MC1WK is the 600 size with PT 1 inch ports, a manual drain on the filter-regulator bowl, a 5 um (W) filter element, an external round pressure gauge scaled in MPa, and a reverse (check) valve fitted. In service, the manual drain means an operator opens the bowl drain by hand, the 5 um element gives cleaner supply air to sensitive equipment, and the check valve helps hold downstream pressure if the upstream supply is interrupted.
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, PT as the standard thread with G (BSPP) and NPT as catalogue options, differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) filtration, and gauges in MPa, psi or bar scales. Maximum working pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm datasheet and flow figures for your application on request.
AirTAC GFC600-25 Combination Unit (GFC60025MC1WK) Technical Specifications
| Model | AirTAC GFC600-25 Combination Unit (GFC60025MC1WK) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-25 Combination Unit (GFC60025MC1WK)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-25 Combination Unit (GFC60025MC1WK) Is Used
Water-treatment actuated valve bank
On the air header feeding actuated butterfly and knife-gate valves at a treatment plant, the 5 um element protects positioner-grade pilots and the check valve holds the bank through supply dips.
Pneumatic test bench in a QA lab
Supplying a leak- and pressure-test bench, the regulated, finely filtered and lubrication-free-at-point-of-test air feed keeps gauge readings consistent, with the MPa round gauge read directly at the set.
Textile-machine actuation supply
Feeding the doffing and jet-pipe actuators on a spinning line, the two-unit set conditions the 1 inch drop, and the check valve keeps the machine circuits charged during brief upstream interruptions.
Is the AirTAC GFC600-25 Combination Unit (GFC60025MC1WK) the Right Set?
Take the 600 size with 1 inch ports where a main air drop serves high-consumption equipment; step down to 400, 300 or 200 only where the flow curve allows. The W suffix selects the 5 um element over the 40 um standard for finer particulate protection, and the K suffix adds a reverse (check) valve for installations where an upstream interruption must not dump downstream pressure. The drain code M means manual bowl drainage - order an automatic-drain version if the plant runs unattended. The regulator on a manual-drain set adjusts from 0.05 to 0.9 MPa (7-130 psi), and the C1 round gauge reads in MPa (psi and bar scales are alternatives). PT is the thread on this model; G (BSPP) and NPT are orderable. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC GFC600-25 Combination Unit (GFC60025MC1WK) FAQ
Flow for the G series is published as curves, not as one rated number, so we do not state a figure here. Tell us your working pressure and downstream demand and we will confirm the flow figures from the datasheet on request before you order.
W selects the 5 um filter element instead of the 40 um standard, and K fits a reverse (check) valve so air does not flow back if the upstream supply drops. Everything else in the code - 600 size, PT1 ports, manual drain and MPa round gauge - stays as standard.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025MC1WK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.