AirTAC GFC600-25 Combination Unit (GFC60025MF1)
The AirTAC AirTAC GFC600-25 Combination Unit (GFC60025MF1) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFC600-25 Combination Unit (GFC60025MF1)
The AirTAC GFC60025MF1 is a two-unit air preparation set combining a filter-regulator and a lubricator, so one purchase covers filtration, pressure regulation and oil-mist lubrication of compressed air. This 600-size unit is built around 1 in PT (JIS) ports, with manual-drain bowls in aluminium alloy at this size. The manual-drain configuration gives a regulator adjustment range of 0.05 to 0.9 MPa (7-130 psi), read on the specified square MPa gauge, and the filter stage carries the standard 40 um element.
This is a genuine AirTAC part supplied by airtacdistr.com for the US market. Across the GFC range you can order 200, 300, 400 and 600 sizes, automatic, manual or differential-pressure drains, 40 um or 5 um (W) filter elements, square or round gauges in MPa, psi or bar scales, and G (BSPP) or NPT thread variants. Because AirTAC publishes flow as curves instead of a single rated figure, ask us to confirm sizing and the full datasheet for your application.
AirTAC GFC600-25 Combination Unit (GFC60025MF1) Technical Specifications
| Model | AirTAC GFC600-25 Combination Unit (GFC60025MF1) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFC600-25 Combination Unit (GFC60025MF1)
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Where the AirTAC GFC600-25 Combination Unit (GFC60025MF1) Is Used
Forging plant press line
A forge shop feeding large air cylinders on its trimming and forging presses uses this 1 in two-unit set at the drop point, giving the press valves clean, regulated and lubricated air with manual draining built into shift routines.
Auto assembly conveyor drives
An automotive assembly plant runs this set on the air supply to conveyor lifters and pallet stops, where the 40 um filter protects directional valves and the lubricator maintains oil mist for the cylinders that cycle all shift.
Water treatment valve actuation
A water treatment plant operating quarter-turn pneumatic actuators on its process valves uses this unit to condition the actuator air supply, holding set pressure with the MPa-scaled regulator and keeping the actuators lubricated.
Is the AirTAC GFC600-25 Combination Unit (GFC60025MF1) the Right Set?
Start with size and port: 600 on 1 in PT ports is the largest step in the GFC family, with 200, 300 and 400 below it for smaller lines. This code has manual drains, which suits attended plants and also gives the wider 0.05-0.9 MPa (7-130 psi) adjustment range; choose automatic (A) or differential-pressure (default) drains for unattended points. The filter element is the standard 40 um grade, with 5 um (W) available where downstream equipment needs finer protection. The gauge is the embedded square type on an MPa scale; psi and bar scales and an external round gauge are the other options. Thread is PT as standard, with G (BSPP) and NPT to order. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC GFC600-25 Combination Unit (GFC60025MF1) FAQ
Flow for this series is published as curves, not as a single rated figure, so we do not quote a number that is not in the catalogue that way. Tell us your application, and we will confirm the correct size from the datasheet on request before you order.
M in the code specifies manual drains, which suit installations where someone walks the line regularly. It also widens the regulator adjustment range to 0.05-0.9 MPa (7-130 psi). For points that are rarely visited, order the automatic (A) or differential-pressure (default) drain version instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025MF1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.