AirTAC GFR200-06 Filter Regulator (GFR20006C2)
The AirTAC AirTAC GFR200-06 Filter Regulator (GFR20006C2) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-06 Filter Regulator (GFR20006C2)
GFR20006C2 is an AirTAC G-series filter regulator: water and particulate removal plus pressure regulation in one body, with no lubricator. This 200-size unit carries a PT1/8 (1/8 in) port, the standard 40 um filter element, a differential-pressure drain on the polycarbonate bowl, and an external round pressure gauge with psi scale for direct reading in US units. Maximum inlet pressure is 1.0 MPa (145 psi) and, with the differential-pressure drain, the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR series is available in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, differential-pressure, automatic or manual drains, 40 um or 5 um elements, MPa, psi or bar gauge scales, G (BSPP) and NPT thread options, and a check-valve variant. Flow is published as curves rather than a single rating, so we confirm flow and datasheet figures on request.
AirTAC GFR200-06 Filter Regulator (GFR20006C2) Technical Specifications
| Model | AirTAC GFR200-06 Filter Regulator (GFR20006C2) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-06 Filter Regulator (GFR20006C2)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Where the AirTAC GFR200-06 Filter Regulator (GFR20006C2) Is Used
Machine drops on US plant air mains
Installed at the point-of-use drop on a factory ring main where operators read and set pressures in psi, providing filtered, regulated 1/8 in supply to the machine's pneumatic panel.
Gate and diverter cylinders on conveyor lines
Feeds the small gate and diverter cylinders along a packaging conveyor, cleaning the take-off air and letting line staff trim trip pressure directly on the psi gauge.
Loading dock actuation panels
Sits in the air panel behind dock levelers and trailer restraint controls, keeping the 1/8 in pilot supply clean and at a set pressure that dock crews can verify in psi.
Is the AirTAC GFR200-06 Filter Regulator (GFR20006C2) the Right Unit?
The C2 gauge code is the main difference here: an external round gauge reading in psi, handy where operators set pressures in US units; MPa (1) and bar (3) scales are the alternatives. Otherwise choose by size step - 200 for 1/8 in ports, 300/400/600 up to 1 in - by drain type (differential-pressure here, or automatic A / manual M, which widens the adjust range to 0.05-0.9 MPa / 7-130 psi), and by filter grade (40 um standard, 5 um with W). Thread is PT as standard on this code, with G (BSPP) and NPT orderable, and a bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-06 Filter Regulator (GFR20006C2) FAQ
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote one number here. Give us your line pressure and air demand and we will confirm the flow and the datasheet figures on request.
Yes. C2 specifies an external round gauge with psi scale; MPa (1) and bar (3) scales are catalogue options, and units with a regulator are also available with the embedded square gauge. The thread can likewise be ordered as G (BSPP) or NPT instead of the standard PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-06 Filter Regulator (GFR20006C2)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.