AirTAC GFR200-06 Filter Regulator (GFR20006JF1)
The AirTAC AirTAC GFR200-06 Filter Regulator (GFR20006JF1) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-06 Filter Regulator (GFR20006JF1)
GFR20006JF1 is an AirTAC GFR-series filter regulator: filtration and pressure regulation combined in one body. This 200-size unit has a PT1/8 port, a differential-pressure drain bowl in polycarbonate, a standard 40 um filter element, and an external square pressure gauge on an MPa scale. The J code means no mounting bracket is included, and no check valve is fitted. Maximum inlet pressure is 1.0 MPa (145 psi) and, with the differential-pressure drain, the regulator setpoint spans 0.15-0.9 MPa (20-130 psi).
It is a genuine AirTAC part for compressed air only, rated -5 to 70 C (non-freezing). The GFR line runs from 200 to 600 size with ports from 1/8 to 1 inch, PT, G or NPT threads, automatic, manual or differential-pressure drains, a 5 um element option (W), round or square gauges on MPa, psi or bar scales, and bracket or no-bracket builds. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
AirTAC GFR200-06 Filter Regulator (GFR20006JF1) Technical Specifications
| Model | AirTAC GFR200-06 Filter Regulator (GFR20006JF1) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-06 Filter Regulator (GFR20006JF1)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Where the AirTAC GFR200-06 Filter Regulator (GFR20006JF1) Is Used
Conveyor gate actuator prep
Filter-regulated supply for pneumatic gate or diverter cylinders on a packaging conveyor, with the square MPa gauge placed for a quick setpoint check at the panel.
Hopper vibrator regulation
Regulates air to a pneumatic vibrator on a small hopper or chute, holding a steady setting while the 40 um element keeps scale and rust particles out of the vibrator.
Machine panel air station
A compact drop for a machine panel air station; the square gauge reads clearly at a glance, and a bracketed version is available by ordering the same unit without the J code.
Is the AirTAC GFR200-06 Filter Regulator (GFR20006JF1) the Right Unit?
The 200 size fits compact 1/8 inch point-of-use drops; step up to 300, 400 or 600 for larger ports and more flow. This build keeps the standard 40 um element and the default differential-pressure drain, which bleeds condensate as air passes the bowl. The F1 gauge code selects the square gauge on an MPa scale - C gives a round gauge instead, and scales 2 or 3 give psi or bar. Threads can be ordered as G (BSPP) or T (NPT) instead of PT, and dropping the J code adds a mounting bracket.
Flow for the GFR series is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-06 Filter Regulator (GFR20006JF1) FAQ
AirTAC publishes GFR flow data as curves rather than a single rated figure, so we do not quote one here. Send us your application details and we will confirm the datasheet figures and check the 200 size and PT1/8 port against your flow requirement before you order.
F selects the external square pressure gauge, here on an MPa scale (code 1); scale codes 2 and 3 give psi or bar instead. C would give a round gauge on the same scales. Everything else in this code decodes as the standard 200-size unit: PT1/8 port, 40 um element, differential-pressure drain and no bracket.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-06 Filter Regulator (GFR20006JF1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.