AirTAC GFR200-06 Filter Regulator (GFR20006LJF1)
The AirTAC AirTAC GFR200-06 Filter Regulator (GFR20006LJF1) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-06 Filter Regulator (GFR20006LJF1)
GFR20006LJF1 is an AirTAC G-series filter regulator: it removes water and particulate from compressed air and holds a regulated downstream pressure in one compact 200-size body. This configuration is the low-pressure (L) type with a PT1/8 port, no mounting bracket (J), a differential-pressure drain on the polycarbonate bowl, a standard 40 um filter element, and a square pressure gauge with an MPa scale.
This is a genuine AirTAC part for compressed air only, rated to 1.0 MPa (145 psi) inlet and operating from -5 to 70 C (non-freezing). The 200-size bowl is polycarbonate; the 600 size uses an aluminium alloy bowl. AirTAC publishes airflow as curves rather than a single rating, so we confirm the flow figure and full datasheet for this model on request.
AirTAC GFR200-06 Filter Regulator (GFR20006LJF1) Technical Specifications
| Model | AirTAC GFR200-06 Filter Regulator (GFR20006LJF1) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-06 Filter Regulator (GFR20006LJF1)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Where the AirTAC GFR200-06 Filter Regulator (GFR20006LJF1) Is Used
Modular machine panel
Filtering and regulating air for the valve manifold on a modular automation panel, where the square MPa gauge sits flush with other panel-mounted instruments.
Small press air feed
Supplying steady low-pressure air to the pneumatic cushioning and part-ejection cylinders on a compact bench press or forming station.
Fixture clamp circuit
Holding a consistent low set pressure to the clamp cylinders on a machining fixture, so workholding force stays repeatable across cycles.
Is the AirTAC GFR200-06 Filter Regulator (GFR20006LJF1) the Right Unit?
At 200 size with a 1/8 in. port, this is the smallest step in the G series; step up to 300, 400 or 600 when your circuit needs a larger port and more flow. The F1 gauge code selects the square pressure gauge with an MPa scale; the external round gauge, psi or bar scales, or no gauge (N) are the alternatives. The L suffix is the low-pressure type - the standard differential-pressure-drain adjustment range for the family is 0.15-0.9 MPa (20-130 psi), and we confirm the exact set-pressure ceiling of the L variant on request. J deletes the mounting bracket, and thread is PT as standard with G (BSPP) and NPT as catalogue options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-06 Filter Regulator (GFR20006LJF1) FAQ
AirTAC publishes flow for the G series as performance curves rather than one rated number, so there is no single figure we can quote honestly. Share your flow demand and pressure and we will confirm the sizing from the datasheet before you order.
F1 is the gauge option: F selects the square pressure gauge and 1 sets an MPa scale. Alternatives are C for the external round gauge (again with 1 = MPa, 2 = psi, 3 = bar scales) or N for no gauge. In this code, L is the low-pressure type and J deletes the mounting bracket.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-06 Filter Regulator (GFR20006LJF1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.