AirTAC GFR200-06 Filter Regulator (GFR20006LN)
The AirTAC AirTAC GFR200-06 Filter Regulator (GFR20006LN) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-06 Filter Regulator (GFR20006LN)
The AirTAC GFR series combines water-and-particulate filtration with pressure regulation in a single body. This GFR20006LN is the G200 size with a PT1/8 port, built as the low-pressure type for circuits set well below standard line pressure. It carries the standard 40 um filter element and a differential-pressure drain in the PC (polycarbonate) bowl, and with no J code a mounting bracket is included, so the unit can be fixed beside the machine rather than hanging on the line. The N code deletes the gauge, so downstream pressure is read at the machine's own gauge. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8" to 1", and options include automatic or manual drains, a 5 um element (W code), a gauge, G (BSPP) or NPT threads, and bracket choices. Published flow data appears as curves rather than a single rating, so we confirm flow and datasheet figures on request before you order.
AirTAC GFR200-06 Filter Regulator (GFR20006LN) Technical Specifications
| Model | AirTAC GFR200-06 Filter Regulator (GFR20006LN) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-06 Filter Regulator (GFR20006LN)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Where the AirTAC GFR200-06 Filter Regulator (GFR20006LN) Is Used
Sorting conveyor gate cylinders
Filtered, reduced-pressure air for the small diverter and gate cylinders along a parcel sorting conveyor, with the included bracket mounting the unit at the machine frame.
Workshop air-drop preparation
Cleaning and reducing the air at a bench drop near a workbench, so hand-held pneumatic tools and small actuators see dry, low-pressure air rather than raw header supply.
Textile machine guide air
Supplying low-pressure air to thread guides and light pneumatic aids on a textile machine, where the 40 um element stops lint-borne grit and the regulator holds a gentle setting.
Is the AirTAC GFR200-06 Filter Regulator (GFR20006LN) the Right Unit?
This unit gives you the smallest G-series frame, G200, with a PT1/8 port and the included bracket; if your machine ports are 1/4" or larger, move up to the 300/400/600 sizes instead. The 40 um element covers general shop-air protection, while the W-coded 5 um variant is available for finer duty. The differential-pressure drain is the default here; automatic (A) and manual (M) drains can be ordered. The N code omits the gauge, and PT thread is standard with G (BSPP) and NPT available as catalogue options. Because this is the L low-pressure type, and flow is published as curves rather than a single rating, ask us to confirm the adjustment range and sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-06 Filter Regulator (GFR20006LN) FAQ
No single rated flow is published; AirTAC gives filter regulator flow as curves. Send us your line pressure, set pressure and consumption, and we will confirm the flow from the datasheet for this PT1/8 G200 unit and suggest a larger size if the curve does not cover your demand.
The L code makes this the low-pressure type of the GFR series, meant for circuits regulated well below standard settings; its exact adjustment range is confirmed on request. With no J code, a mounting bracket is included, unlike bracketless variants, so the unit can be panel- or frame-mounted at the point of use.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-06 Filter Regulator (GFR20006LN)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.