AirTAC GFR200-06 Filter Regulator (GFR20006MC2W)
The AirTAC AirTAC GFR200-06 Filter Regulator (GFR20006MC2W) is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-06 Filter Regulator (GFR20006MC2W)
GFR20006MC2W is an AirTAC G-series filter regulator: a single body that filters compressed air and regulates downstream pressure. At size 200 with a PT1/8 port it is the compact end of the range. This code decodes to a 5 um filter element (W), a manual drain on the bowl, and an external round pressure gauge scaled in psi, with the 0.05-0.9 MPa (7-130 psi) adjustment range that applies to manual-drain GFR units. The polycarbonate bowl is standard at this size and a mounting bracket is included.
This is a genuine AirTAC part. The GFR family runs from size 200 to 600 with ports from 1/8 in. to 1 in., drain choices of differential-pressure, automatic or manual, 40 um standard or 5 um filtration, and G (BSPP) or NPT thread versions in the catalogue. Maximum inlet pressure is 1.0 MPa (145 psi) and operating temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so ask us to confirm datasheet values for your sizing.
AirTAC GFR200-06 Filter Regulator (GFR20006MC2W) Technical Specifications
| Model | AirTAC GFR200-06 Filter Regulator (GFR20006MC2W) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-06 Filter Regulator (GFR20006MC2W)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Where the AirTAC GFR200-06 Filter Regulator (GFR20006MC2W) Is Used
Solder-rework bench air
Regulated, filtered air for a handheld rework tool at an electronics bench, with the psi gauge matching US instrument readouts and the manual drain bled at shift end.
Pick-and-place gripper feed
Point-of-use supply for the small gripping cylinder on a PCB assembly head, with 5 um filtration upstream of the gripper's fine clearances.
Test-rig clamp circuit
Pressure control for a pneumatic clamping fixture on a laboratory test rig, where the operator vents the manual-drain bowl between sessions.
Is the AirTAC GFR200-06 Filter Regulator (GFR20006MC2W) the Right Unit?
Size 200 with PT1/8 is the smallest G-series step; move up to GFR300 (PT1/4) and beyond when line demand outgrows this port. Drain type is a real choice: this manual-drain version needs an operator to bleed the bowl, while automatic and differential-pressure drains handle condensate unattended. The W suffix selects the 5 um element instead of the standard 40 um. Gauge scales of MPa, psi or bar can be ordered, and the thread is PT as standard with G (BSPP) and NPT as catalogue options. Because AirTAC publishes flow as curves and not a single rating, send us your application and we will confirm sizing from the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-06 Filter Regulator (GFR20006MC2W) FAQ
AirTAC publishes flow for the G-series as characteristic curves rather than a single rated number, so quoting one figure would not be honest. Tell us your line pressure and demand and we will confirm the sizing from the GFR200 datasheet on request before you order.
It sets the gauge scale: the round external gauge on this unit reads in psi. Scale code 1 gives MPa and 3 gives bar, and a no-gauge (N) version is also available across the GFR range.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-06 Filter Regulator (GFR20006MC2W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.