AirTAC GFR200-06 Filter Regulator (GFR20006MJC1WK)
The AirTAC AirTAC GFR200-06 Filter Regulator (GFR20006MJC1WK) is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-06 Filter Regulator (GFR20006MJC1WK)
The AirTAC GFR20006MJC1WK is a combined filter regulator with a built-in reverse (check) valve: it removes water and particulate, regulates downstream pressure, and prevents backflow through the unit. This 200-size version is threaded PT1/8, carries the fine 5 um element, and has a polycarbonate bowl with a manual drain for hand-emptying on a service round. The external round MPa gauge displays the regulated pressure, and the J code means no mounting bracket is included.
This is a genuine AirTAC part. The G series is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and drain type, filter grade, gauge scale and thread (PT standard, G or NPT to order) are all selectable. Flow appears in the catalogue as curves, so we confirm flow and full datasheet figures on request.
AirTAC GFR200-06 Filter Regulator (GFR20006MJC1WK) Technical Specifications
| Model | AirTAC GFR200-06 Filter Regulator (GFR20006MJC1WK) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-06 Filter Regulator (GFR20006MJC1WK)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Where the AirTAC GFR200-06 Filter Regulator (GFR20006MJC1WK) Is Used
Pneumatic valve manifold supply
Filtered, regulated air to a solenoid-valve manifold, with the check valve stopping downstream surges from pushing back through the regulator when adjacent sections vent or cycle.
Assembly bench air drops
Point-of-use supply for hand tools and small fixtures on an assembly bench: 5 um air, a locked setpoint on the MPa gauge, and manual drain emptied during end-of-shift housekeeping.
Packaging machine glue station
Air to a hot-melt or label glue applicator where backflow protection matters: the check valve isolates the regulator and the 5 um element keeps fine contamination out of the applicator valve.
Is the AirTAC GFR200-06 Filter Regulator (GFR20006MJC1WK) the Right Unit?
The K code adds a reverse/check valve - useful where a downstream pressure spike must not push back through the regulator. Size the port to the circuit: 1/8 in here for light flows, larger 300/400/600 frames where more air is needed. Manual drain fits regularly serviced cabinets; automatic or differential-pressure drain codes cover unattended spots. Keep the 5 um (W) element where finer filtration matters, or move to the 40 um standard. Gauge options include square styles and psi or bar scales; PT is standard with G and NPT as order options, and a bracket is a separate code. Flow is published as curves rather than one rating, so ask us to confirm sizing against the application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-06 Filter Regulator (GFR20006MJC1WK) FAQ
Flow for the G series is published as curves rather than a single rated figure, so we do not state a number here. Share your supply pressure, set pressure and equipment demand, and we will confirm the flow from the datasheet on request before ordering.
It adds a reverse (check) valve to the unit, so air cannot flow backwards through the filter regulator. Everything else in the code is unchanged: PT1/8 thread, manual drain, 5 um element, no bracket, and an external round gauge scaled in MPa. Order the same code without K if backflow protection is not needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-06 Filter Regulator (GFR20006MJC1WK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.