AirTAC GFR200-06 Filter Regulator (GFR20006MLJNW)
The AirTAC AirTAC GFR200-06 Filter Regulator (GFR20006MLJNW) is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-06 Filter Regulator (GFR20006MLJNW)
The GFR20006MLJNW is an AirTAC G-series filter regulator: water and particulate removal plus pressure regulation combined in one 200-size body with a 1/8 inch PT port. This code is the low-pressure type (L) with a manual drain (M) and the finer 5 um filter element (W); J means no mounting bracket is fitted and N means no pressure gauge is supplied, keeping the unit minimal where a panel gauge already exists. The polycarbonate 200-size bowl shows the condensate level, and the operating range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR range spans 200/300/400/600 sizes with ports from 1/8 to 1 inch, drain choices of differential-pressure, automatic or manual, 40 um standard or 5 um elements, optional square or round gauges, and PT, G (BSPP) or NPT threads. Because AirTAC publishes flow as curves and not as one rated figure, we confirm sizing and datasheet figures on request.
AirTAC GFR200-06 Filter Regulator (GFR20006MLJNW) Technical Specifications
| Model | AirTAC GFR200-06 Filter Regulator (GFR20006MLJNW) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-06 Filter Regulator (GFR20006MLJNW)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Where the AirTAC GFR200-06 Filter Regulator (GFR20006MLJNW) Is Used
Truss and framing nailer stations
Regulate air to pneumatic nailers and staplers at a prefabrication bench, with the 5 um element protecting tool seals from water and grit and the manual drain emptied at breaks.
Trailer-mounted pneumatics
Supply filtered, reduced-pressure air to door, ramp and tail-lift actuators on delivery vehicles, where the compact 200 size fits cramped mounting space without a bracket.
Wire and cable machinery
Feed low-pressure air to thread-guiding jets and light clamps on a wire-drawing or spooling line, with the fine 5 um element ahead of small nozzles.
Is the AirTAC GFR200-06 Filter Regulator (GFR20006MLJNW) the Right Unit?
This is the 200-size, PT1/8 port entry of the GFR line; move to 300 (1/4 in), 400 (3/8 and 1/2 in) or 600 (3/4 and 1 in) as your flow requirement grows. Drain is manual, suited to supervised or intermittent duty, with automatic (A) and differential-pressure (blank) variants for unattended service. The W element is the 5 um fine grade; omit W for the standard 40 um. No gauge and no bracket are fitted with the N and J codes, and gauge variants with square or round dials in MPa, psi or bar scales, plus a bracket version, are selectable in the order code. Thread is PT as standard with G (BSPP) and NPT options. Two confirmations before ordering: the exact adjustment range of the L low-pressure type, and the flow curve against your demand, since flow is published as curves only.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-06 Filter Regulator (GFR20006MLJNW) FAQ
Flow for the G series is published as curves rather than a single rated number, so we do not state a figure here. Share your working pressure and consumption and we will confirm whether the 200 size with the PT1/8 port meets your demand, and we will send the datasheet curve on request.
M means you open the drain by hand to expel collected condensate, which suits supervised or intermittent stations. The A variant discharges condensate automatically for unattended lines, and the blank code gives the differential-pressure drain. All three are available in the same 200-size GFR body - ask us to quote the one that fits your duty cycle.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-06 Filter Regulator (GFR20006MLJNW)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.