AirTAC GFR200-06 Filter Regulator (GFR20006MNWK)
The AirTAC AirTAC GFR200-06 Filter Regulator (GFR20006MNWK) is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-06 Filter Regulator (GFR20006MNWK)
The AirTAC GFR200-06 is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This 200-size unit is fitted with PT1/8 (1/8 in) ports, a 5 um filter element for finer filtration than the standard 40 um grade, and a manual drain you operate by hand to empty the polycarbonate bowl. No gauge is fitted on this configuration, and a built-in reverse (check) valve is included. Maximum inlet pressure is 1.0 MPa (145 psi), the standard regulator adjustment range for this manual-drain version is 0.05-0.9 MPa (7-130 psi), and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with a choice of ports, drain types (differential-pressure, automatic or manual), 40 um or 5 um filtration, gauge options, and PT, G or NPT threads. Flow figures for this series are published as curves rather than a single rating, so contact us and we will confirm the datasheet figures for your application on request.
AirTAC GFR200-06 Filter Regulator (GFR20006MNWK) Technical Specifications
| Model | AirTAC GFR200-06 Filter Regulator (GFR20006MNWK) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-06 Filter Regulator (GFR20006MNWK)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Where the AirTAC GFR200-06 Filter Regulator (GFR20006MNWK) Is Used
Small pneumatic press feed
Clean, regulated air to a compact single-acting press cylinder on a light assembly fixture, with the 5 um element protecting the directional valve from fine particles.
Carton-sealing machine air prep
Point-of-use filtration and pressure control for the taping and flap-folding cylinders on a packaging line, with manual drain servicing during shift changeover.
Workbench air-tool supply
Filtered, adjustable air at a maintenance bench feeding impact drivers and air ratchets, with the check valve holding downstream pressure when upstream supply drops.
Is the AirTAC GFR200-06 Filter Regulator (GFR20006MNWK) the Right Unit?
Start with the port size: this 200-size unit carries PT1/8 ports, and the GFR range steps up through 300, 400 and 600 for larger ports and higher air demand - match the step to your line's flow requirement rather than oversizing blindly. On filtration, the standard element is 40 um; the 5 um element on this unit suits finer-particle protection such as precision valves and instruments. Drain choice matters: manual drain (this unit) is emptied by hand and suits points that are easy to reach, while automatic and differential-pressure drains suit less accessible installs. Gauge and scale (MPa, psi or bar) are selectable on GFR units, and this configuration ships without one - add a gauge code if you need a local pressure readout. Threads are PT as standard with G (BSPP) and NPT as order options, and a mounting bracket is included.
One honest note on sizing: flow for this series is published as curves, not a single rated figure, so please ask us to confirm the datasheet flow against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-06 Filter Regulator (GFR20006MNWK) FAQ
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a flow number for this unit. Tell us your application and air demand and we will confirm the datasheet flow curves against it on request.
The M in the code GFR20006MNWK specifies a manual drain: condensate collected in the polycarbonate bowl is released by hand. Choose manual where the unit is easy to reach and can be drained as part of a routine; choose the automatic or differential-pressure drain option where access is difficult or drainage must not depend on an operator.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-06 Filter Regulator (GFR20006MNWK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.