AirTAC GFR200-08 Filter Regulator (GFR20008C1WK)
The AirTAC AirTAC GFR200-08 Filter Regulator (GFR20008C1WK) is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-08 Filter Regulator (GFR20008C1WK)
The AirTAC GFR series combines water/particulate filtration and pressure regulation in one body. This GFR20008C1WK is the 200 size with a PT 1/4 inch port, a 5 um filter element (W code), the standard differential-pressure bowl drain, an external round pressure gauge on the MPa scale, and a reverse (check) valve fitted. It cleans compressed air and holds a set downstream pressure with an adjustment range of 0.15-0.9 MPa (20-130 psi); maximum inlet pressure is 1.0 MPa (145 psi).
This is a genuine AirTAC part. The G series runs from size 200 to 600 with ports from 1/8 to 1 inch; this 200 body has a PC (polycarbonate) bowl, operates from -5 to 70 C non-freezing, and comes with a mounting bracket included as standard. Flow is published as curves rather than a single rating, so we confirm datasheet and sizing figures on request.
AirTAC GFR200-08 Filter Regulator (GFR20008C1WK) Technical Specifications
| Model | AirTAC GFR200-08 Filter Regulator (GFR20008C1WK) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-08 Filter Regulator (GFR20008C1WK)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-08 (two-unit set) |
Where the AirTAC GFR200-08 Filter Regulator (GFR20008C1WK) Is Used
Conveyor gate cylinder supply
Feeds the diverting gate cylinders on a conveyor line, filtering compressor water and holding a stable pressure so gate timing stays repeatable.
Clamp circuit on a welding jig
Regulates and cleans air to the hold-down clamps of a welding jig, with the check valve preventing the circuit from being backed through at shutdown.
Maintenance shop air drop
Prepares a 1/4 inch bench drop for pneumatic hand tools and small fixtures in a maintenance shop, keeping rust and water out of the tools.
Is the AirTAC GFR200-08 Filter Regulator (GFR20008C1WK) the Right Unit?
Sizing starts at the port: the 200 size steps up from the 1/8 inch 06 port to this 1/4 inch 08 port, while larger 300/400/600 bodies carry bigger ports and more flow - match the step to your demand. The K code adds a reverse/check valve, useful where backflow through the unit must be prevented. The differential-pressure drain (standard here) suits light condensate loads; M manual or A automatic drain codes are available where draining practice differs. The 5 um element (W) suits finer instrument circuits; the standard element is 40 um.
This version carries an external round gauge on the MPa scale and the PT standard thread; G (BSPP) and NPT are catalogue options. A J-code variant omits the bracket. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-08 Filter Regulator (GFR20008C1WK) FAQ
AirTAC publishes G-series flow as pressure-drop curves rather than a single rated figure, so we do not quote a number here. Send us your flow demand and working pressure and we will confirm the correct size from the datasheet on request.
K means a reverse/check valve is fitted, so air can pass in one direction only and the downstream circuit cannot push flow back through the unit. Order the same code without K if you do not need backflow prevention.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-08 Filter Regulator (GFR20008C1WK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.