AirTAC GFR200-08 Filter Regulator (GFR20008JC1K)
The AirTAC AirTAC GFR200-08 Filter Regulator (GFR20008JC1K) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-08 Filter Regulator (GFR20008JC1K)
GFR20008JC1K is an AirTAC G-series filter regulator built like the JC1 but with the K option fitted: a reverse (check) valve in the unit, which blocks backflow through it. It still performs both jobs in one body - filtering water and particulate from compressed air and regulating downstream pressure - with a size 200 body, PT1/4 (PT thread, 1/4 in.) port, 40 um element, polycarbonate bowl with differential-pressure drain, an external round MPa gauge, and no mounting bracket. Adjust range is 0.15-0.9 MPa (20-130 psi), inlet up to 1.0 MPa (145 psi), temperature -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family covers sizes 200 to 600 with ports from 1/8 in. to 1 in., and the K reverse-valve option, bracketless (J) or bracket builds, gauge type and scale, 40 um or 5 um (W) elements, and G (BSPP) or NPT threads are all catalogue choices. Flow is published as curves rather than a single rated figure, so we confirm sizing and the datasheet on request before you order.
AirTAC GFR200-08 Filter Regulator (GFR20008JC1K) Technical Specifications
| Model | AirTAC GFR200-08 Filter Regulator (GFR20008JC1K) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-08 Filter Regulator (GFR20008JC1K)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-08 (two-unit set) |
Where the AirTAC GFR200-08 Filter Regulator (GFR20008JC1K) Is Used
Pneumatic press clamping station
Feeds the clamping cylinders of a pneumatic press workholding station where backflow through the supply unit is undesirable, with the MPa gauge as the setter's reference for the clamp setting.
Gate actuator on a packaging line
Conditions and regulates the supply to the gate and reject actuators on a packaging line, with the built-in check valve keeping the unit one-directional in the machine's air schematic.
Trailer tailgate lift controls
Supplies the tailgate and dock-actuation cylinders on distribution vehicles and loading bays, combining filtration and regulated pressure for the control valves in one compact unit.
Is the AirTAC GFR200-08 Filter Regulator (GFR20008JC1K) the Right Unit?
Specify K when the circuit should not allow backflow through the unit; without the K the same body is the plain GFR20008JC1. The J in the code means no mounting bracket is included, so plan the mounting accordingly, and C1 gives an external round gauge on the MPa scale (psi or bar scales, square embedded gauges, and gauge-less builds are alternatives). Choose the drain for the duty: differential-pressure drain here (0.15-0.9 MPa / 20-130 psi), manual drain for the wider 0.05-0.9 MPa (7-130 psi) window, automatic drain for unattended bowls.
The standard element is 40 um; order the W suffix if the downstream valves need 5 um filtration, and choose G (BSPP) or NPT thread at order time if PT does not fit the installation. Because flow is published as curves, not a single rating, send us your flow and pressure points and we will confirm the size against the datasheet before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-08 Filter Regulator (GFR20008JC1K) FAQ
Flow for the G series is published as performance curves, not as a single rated figure, so we do not state one here. Share your flow and working pressure and we will confirm the datasheet figures on request before you order.
K denotes a reverse (check) valve fitted in the unit to prevent backflow through it. Everything else matches the plain GFR20008JC1: size 200, PT1/4 port, 40 um element, differential-pressure drain, round MPa gauge, and no mounting bracket.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-08 Filter Regulator (GFR20008JC1K)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.