AirTAC GFR200-08 Filter Regulator (GFR20008MF2)
The AirTAC AirTAC GFR200-08 Filter Regulator (GFR20008MF2) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-08 Filter Regulator (GFR20008MF2)
The AirTAC GFR20008MF2 is a G-series filter regulator: filtration and pressure regulation in one body, with a drain bowl and no lubricator. This 200-size unit carries a 1/4 in. PT port, a manual drain, the standard 40 um filter element and an embedded square pressure gauge scaled in psi. Downstream pressure is set within the manual-drain range of 0.05-0.9 MPa (7-130 psi), with a maximum working pressure of 1.0 MPa (145 psi) at -5 to 70 C (non-freezing). The PC bowl on the 200 size gives a clear view of collected water and contaminants.
This is a genuine AirTAC part, available across the G-series size steps 200, 300, 400 and 600, with choices of drain type, filter grade, gauge scale, thread (PT standard, G and NPT as catalogue options) and bracket. Flow data is published as curves rather than a single rating, so ask us and we will confirm the datasheet and sizing figures on request.
AirTAC GFR200-08 Filter Regulator (GFR20008MF2) Technical Specifications
| Model | AirTAC GFR200-08 Filter Regulator (GFR20008MF2) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-08 Filter Regulator (GFR20008MF2)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-08 (two-unit set) |
Where the AirTAC GFR200-08 Filter Regulator (GFR20008MF2) Is Used
Conveyor gating and diverters
Supplies cleaned, regulated air to the cylinders that raise, divert and stop product on packaging and sorting conveyors, with the psi gauge matching the reading crew members set on the line.
Truck and trailer service bays
Conditions shop air at the service bay wall for tyre chucks, impact wrenches and air-operated jacks, where the 40 um element handles general shop air and the manual drain clears the bowl between jobs.
General plant drop-feed air prep
Installed at individual machine drops across a production floor to give each machine its own filtered, regulated supply, independent of what the header pressure is doing.
Is the AirTAC GFR200-08 Filter Regulator (GFR20008MF2) the Right Unit?
The code settles the specification for you: 200 size on a 1/4 in. PT port, manual drain, standard 40 um element, and a psi-scaled square gauge that reads the same units as most US plant gauges. If your process needs finer filtration, the same body is offered with a 5 um element; if your team reads bar or MPa, those gauge scales exist too. Thread is PT as standard, with G (BSPP) and NPT as orderable options, and a mounting bracket is included.
Flow is published as curves, not a single rated number, so we cannot state one here. Share your pressure and demand figures and we will confirm sizing against the datasheet before you place the order.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-08 Filter Regulator (GFR20008MF2) FAQ
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so we do not quote a number here. Send us your working pressure and expected air consumption, and we will confirm the datasheet curve and whether the 200 size with a 1/4 in. port suits your application.
GFR is the filter-regulator family, 200 is the size, 08 sets the 1/4 in. port, M is a manual drain, F is the embedded square gauge and 2 sets its scale to psi. No W appears, so the element is the standard 40 um grade, and the thread is PT as standard with G and NPT available to order.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-08 Filter Regulator (GFR20008MF2)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.