AirTAC GFR200-08 Filter Regulator (GFR20008MF2W)
The AirTAC AirTAC GFR200-08 Filter Regulator (GFR20008MF2W) is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-08 Filter Regulator (GFR20008MF2W)
The AirTAC GFR20008MF2W is a G-series filter regulator: filtration and pressure regulation combined in one body, with a drain bowl and no lubricator. This 200-size unit carries a 1/4 in. PT port, a manual drain, the optional 5 um filter element for finer particulate and water removal than the standard 40 um grade, and an embedded square pressure gauge scaled in psi. Downstream pressure is adjusted within the manual-drain range of 0.05-0.9 MPa (7-130 psi), with a maximum working pressure of 1.0 MPa (145 psi) at -5 to 70 C (non-freezing). The PC bowl on the 200 size shows collected condensate at a glance.
This is a genuine AirTAC part, offered across the G-series size steps 200, 300, 400 and 600, with choices of drain type, filter grade, gauge scale, thread (PT standard, G and NPT as catalogue options) and bracket. Flow data is published as curves rather than a single rating, so ask us and we will confirm the datasheet and sizing figures on request.
AirTAC GFR200-08 Filter Regulator (GFR20008MF2W) Technical Specifications
| Model | AirTAC GFR200-08 Filter Regulator (GFR20008MF2W) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-08 Filter Regulator (GFR20008MF2W)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-08 (two-unit set) |
Where the AirTAC GFR200-08 Filter Regulator (GFR20008MF2W) Is Used
CNC machine pneumatic circuits
Feeds the tool-change cylinders, clamps and air-blast nozzles on a machining centre, where the 5 um element helps keep fine pilot-air circuits clean and the psi gauge matches the machine builder's settings.
Pick-and-place gripper supply
Conditions air for the vacuum ejectors and gripper cylinders on robotic pick-and-place cells, with the manual drain letting operators clear the bowl during planned changeovers.
Process valve actuation skids
Provides filtered, regulated air to pneumatic actuated valves on process skids, where instrument-grade supply and a clearly readable psi setting are part of the skid build.
Is the AirTAC GFR200-08 Filter Regulator (GFR20008MF2W) the Right Unit?
This code gives you the finer-filtration, psi-reading build: 200 size on a 1/4 in. PT port, manual drain, 5 um element and a square gauge in psi. The W element is the right call when downstream valves, cylinders or instruments are sensitive to carryover; for general plant air the standard 40 um grade costs nothing to lose. Thread is PT as standard, with G (BSPP) and NPT as orderable options, and a mounting bracket is included.
Because flow is published as curves and not as one rated figure, we cannot quote a number here. Give us your pressure and demand details and we will confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-08 Filter Regulator (GFR20008MF2W) FAQ
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so we do not state a number here. Tell us your supply pressure and required air volume, and we will confirm the datasheet curve and whether the 200 size with a 1/4 in. port fits your application.
The W in GFR20008MF2W selects the 5 um element, which removes finer particles than the standard 40 um grade - a good match for pilot circuits, instruments and precision pneumatics. For general shop and plant air, the standard grade is usually sufficient. Either way, we can confirm the right choice against your datasheet on request.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-08 Filter Regulator (GFR20008MF2W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.