AirTAC GFR200-08 Filter Regulator (GFR20008MJN)
The AirTAC AirTAC GFR200-08 Filter Regulator (GFR20008MJN) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR200-08 Filter Regulator (GFR20008MJN)
The AirTAC GFR20008MJN is a GFR-series filter regulator: filtration and pressure regulation combined in one body, with a drain bowl but no lubricator. This 200-size unit has a PT1/4 port, a manual drain, the standard 40 um filter element, and the N code means no gauge is fitted. Medium is compressed air; max working pressure is 1.0 MPa (145 psi) and the regulator setting range with manual drain is 0.05-0.9 MPa (7-130 psi). Operating temperature is -5 to 70 C, non-freezing. The 200-size bowl is polycarbonate (PC).
This is a genuine AirTAC part. The GFR series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options include thread type (PT standard, G or NPT), drain type (differential-pressure, automatic or manual), 40 um or 5 um filtration, embedded square or external round gauges with different scales, bracket and check valve. Flow figures are published as curves rather than a single rating, so we confirm datasheet figures for your application on request.
AirTAC GFR200-08 Filter Regulator (GFR20008MJN) Technical Specifications
| Model | AirTAC GFR200-08 Filter Regulator (GFR20008MJN) |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR200-08 Filter Regulator (GFR20008MJN)
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-08 (two-unit set) |
Where the AirTAC GFR200-08 Filter Regulator (GFR20008MJN) Is Used
Workshop air-drop regulation
A filtered, regulated take-off point on a workshop air drop feeding impact drivers, ratchets and blow guns, where the manual drain suits end-of-shift drainage during housekeeping.
Pneumatic press clamping line
Setting and holding a fixed downstream pressure on the clamping cylinders of a small pneumatic press, with 40 um filtration as general protection for standard seals and valves.
Conveyor guide-rail actuators
Regulating air to the guide-rail adjusters and stopper cylinders on a packaging conveyor, where the set pressure keeps rail positioning repeatable across changeovers.
Is the AirTAC GFR200-08 Filter Regulator (GFR20008MJN) the Right Unit?
The 200 size with a 1/4 inch port suits compact circuits; move up to GFR300, GFR400 or GFR600 when your flow demand is higher. This version has a manual drain, which suits periodic supervised drainage and widens the regulation range to 0.05-0.9 MPa (7-130 psi); pick automatic or differential-pressure drain if hand draining is not practical. Filtration is the standard 40 um; the 5 um (W) element is available if finer filtration is needed. No gauge is fitted with the N code, and gauge and scale options exist if you later want local pressure indication. Thread is PT as standard, with G (BSPP) and NPT as catalogue options, and the J code means no bracket is fitted. Flow is published as curves, not a single rating, so ask us to confirm sizing before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR200-08 Filter Regulator (GFR20008MJN) FAQ
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not state a number here. Share your application details and we will confirm the flow and datasheet figures on request before you order.
N means no gauge is supplied with this unit, and J means no bracket. Gauge variants are available in the same series if you want local pressure indication, including the embedded square gauge and an optional external round gauge with MPa, psi or bar scales. Thread is PT on this version, with G (BSPP) and NPT orderable as catalogue options.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GFR200-08 Filter Regulator (GFR20008MJN)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.