Airtac GFR Filter Regulator GFR200C06JC1W
The AirTAC Airtac GFR Filter Regulator GFR200C06JC1W is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR200C06JC1W
GFR200C06JC1W is an AirTAC G-series filter regulator: a filter and a pressure regulator in one body, for compressed air only. This configuration is the size 200 unit with a 1/8 in. PT port, the standard differential-pressure drain, a 5 um filter element (W) and an external round pressure gauge reading in MPa; the J code means it is supplied without a mounting bracket. Inlet pressure is rated to 1.0 MPa (145 psi), the setpoint adjusts from 0.15 to 0.9 MPa (20-130 psi) and the polycarbonate bowl is rated for -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the GFR family, available in sizes 200, 300, 400 and 600 with ports from 1/8 in. to 1 in., plus options for drain type, element grade, gauge type and scale, G (BSPP) or NPT threads, a reverse valve and bracket. AirTAC publishes flow for these units as curves, not as a single rating, so ask us to confirm the datasheet figures for your application before ordering.
Airtac GFR Filter Regulator GFR200C06JC1W Technical Specifications
| Model | Airtac GFR Filter Regulator GFR200C06JC1W |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR200C06JC1W
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR200C06JC1W Is Used
Valve island supply in an electronics assembly cell
Conditioning air upstream of a compact valve island driving placement heads, where the 5 um element is specified for finer particle removal ahead of the valves.
Enclosure air feed for measuring instruments
Feeding clean, regulated air to instruments mounted in a protective enclosure, with the 5 um grade chosen where finer filtration is required by the instrument maker.
Atomising air setting on a small coating head
Regulating atomising air to a small coating or marking head on a production line, with the round MPa gauge making repeatable setpoint adjustment straightforward.
Is the Airtac GFR Filter Regulator GFR200C06JC1W the Right Unit?
The choices that matter in this size: port step (1/8 in. here; the 300/400/600 bodies take larger ports for more flow), drain type (differential-pressure standard, A automatic, M manual), element grade - this unit carries the W 5 um element instead of the 40 um standard - gauge type and scale, thread (PT standard, G and NPT orderable) and bracket (J omits it). AirTAC publishes flow for GFR units as curves rather than a single rated number, so send us your flow and pressure conditions and we will confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR200C06JC1W FAQ
Flow for GFR units is published by AirTAC as curves rather than a single rated figure, so we do not state a number here. Give us your flow and working pressure and we will confirm the datasheet figures and check the sizing before you order.
Yes - PT is the standard thread for GFR200 units, and G (BSPP) and NPT are catalogue thread options specified in the code (T for NPT, G for BSPP). The rest of this configuration - 5 um element, differential-pressure drain, round MPa gauge, no bracket - stays the same.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFR Filter Regulator GFR200C06JC1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.