Airtac GFR Filter Regulator GFR200C06JF1WK
The AirTAC Airtac GFR Filter Regulator GFR200C06JF1WK is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR200C06JF1WK
The AirTAC GFR200 series combines an air filter and a pressure regulator in one body: compressed air passes through the 5 um element, where water and fine particulate are stripped out, then the downstream pressure is set to the level your equipment needs. This configuration is the 200 size with PT1/8 ports, a differential-pressure drain that vents the bowl when the element loads up, a square pressure gauge on the MPa scale, and an integrated reverse/check valve that holds downstream pressure if the supply is interrupted. No mounting bracket is fitted (J). The 200-size bowl is polycarbonate (PC).
This is a genuine AirTAC part. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi) with this drain type, and the operating temperature range is -5 to 70 C (non-freezing). The GFR family also comes in 300, 400 and 600 sizes with larger ports, manual or automatic drains, 40 um or 5 um elements, G (BSPP) or NPT threads, and gauge options. AirTAC publishes flow as characteristic curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
Airtac GFR Filter Regulator GFR200C06JF1WK Technical Specifications
| Model | Airtac GFR Filter Regulator GFR200C06JF1WK |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR200C06JF1WK
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR200C06JF1WK Is Used
Paint spray booth gun feed
Feeds spray guns at a booth point-of-use station: the 5 um element keeps fine contaminant out of the gun and finish, while the regulator holds a steady atomising pressure and the check valve keeps the line charged during brief supply dips.
Analytical instrument supply air
Conditions the small air feed to laboratory analysers and sample-handling gear, where the 1/8in ports and the MPa-reading square gauge let a technician dial in and verify the set point at the instrument.
Cartoning machine glue-head air
Regulates the air to glue heads and small actuators on a cartoner; the reverse/check valve holds the regulated pressure on downstream circuits when the machine pauses and the main supply momentarily drops.
Is the Airtac GFR Filter Regulator GFR200C06JF1WK the Right Unit?
The 200 size with 1/8in ports suits point-of-use regulation at the machine rather than a main line supply; step up to 300/400/600 if your circuit draws more air. The 5 um (W) element is the right pick where fine mist or silt reaches sensitive components; the 40 um standard grade copes with general water and dirt removal. The differential-pressure drain is the set-and-forget choice, or choose A (automatic) or M (manual). The square MPa gauge is fitted here; N deletes it and C gives an external round gauge with MPa, psi or bar scales. PT is the standard thread, with G (BSPP) and NPT available as catalogue options, and J omits the bracket.
Flow for the G series is published as characteristic curves, not a single rated figure, so send us your application details and we will confirm the right size against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR200C06JF1WK FAQ
AirTAC does not publish a single rated flow figure for the G series; flow is given as characteristic curves. Tell us your working pressure and air demand and we will confirm the sizing for this unit against the datasheet on request before you order.
K indicates that a reverse/check valve is fitted. It holds pressure on the downstream side if the upstream supply is cut, which is useful on circuits that must stay clamped or charged through a brief interruption. The same unit without K (GFR200C06JF1W) has no check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFR Filter Regulator GFR200C06JF1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.