AirTAC GFR300-08 Filter Regulator (GFR30008ALF1W)
The AirTAC AirTAC GFR300-08 Filter Regulator (GFR30008ALF1W) is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR300-08 Filter Regulator (GFR30008ALF1W)
The AirTAC GFR series provides filtration and pressure regulation in one body: a drain bowl removes water and particulate and the regulator sets downstream pressure. This configuration is the 300 size with a PT1/4 port (PT is the standard thread), an automatic drain that clears condensate without operator attention, a 5 um element for finer filtration than the standard 40 um grade, and the low-pressure (L) regulator type. The embedded square pressure gauge with MPa scale is fitted and the mounting bracket is included. Bowl material on the 300 size is polycarbonate (PC); maximum working (inlet) pressure is 1.0 MPa (145 psi); operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The G-series is offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, drain choices (differential-pressure, automatic, manual), 40 um or 5 um filtration, G(BSPP) and NPT thread alternatives, gauge options and bracket versions. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures for your application on request.
AirTAC GFR300-08 Filter Regulator (GFR30008ALF1W) Technical Specifications
| Model | AirTAC GFR300-08 Filter Regulator (GFR30008ALF1W) |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR300-08 Filter Regulator (GFR30008ALF1W)
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT1/4" · 5 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-08 (two-unit set) |
Where the AirTAC GFR300-08 Filter Regulator (GFR30008ALF1W) Is Used
Spray-gun atomizing air in finishing cells
Conditioning the air feed to spray guns in a coating line, where the 5 um element helps keep water and particles out of the atomizing air path before the gun.
Wire and cable manufacturing equipment
Feeding clean, low-pressure regulated air to dancer rollers, air pads and guide actuation on cable lines, with the automatic drain handling condensate around the clock.
Test benches and calibration rigs
Supplying stable low-pressure air to pneumatic test fixtures in an engineering lab, with the MPa square gauge giving technicians a clear reading of the set pressure.
Is the AirTAC GFR300-08 Filter Regulator (GFR30008ALF1W) the Right Unit?
Decodable choices in the G-series: size step (200/300/400/600) versus the port and flow your circuit needs; drain type (this unit: automatic; alternatives are the differential-pressure default and manual); element grade 40 um standard or 5 um (W) for finer air; gauge type and scale; PT standard thread versus orderable G(BSPP)/NPT; bracket included or deleted with J. This unit is the low-pressure (L) type; the standard-type GFR with automatic drain adjusts 0.15-0.9 MPa (20-130 psi), and we confirm the low-pressure adjustment span for your set point on request. Flow is published as curves rather than a single rating, so ask us to confirm sizing against the application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR300-08 Filter Regulator (GFR30008ALF1W) FAQ
There is no single rated flow figure to quote: AirTAC publishes G-series flow as curves rather than a rating. Tell us your pressure and duty and we will confirm the applicable flow data from the datasheet on request.
The standard G-series element grade is 40 um; adding W to the code specifies the finer 5 um element, suited where water carryover and finer particulate are a concern. Choose the grade in the code when ordering; both are available across the GF/GFR/GFC/GC families.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC GFR300-08 Filter Regulator (GFR30008ALF1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.