AirTAC GFR300-08 Filter Regulator (GFR30008LF1)
The AirTAC AirTAC GFR300-08 Filter Regulator (GFR30008LF1) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR300-08 Filter Regulator (GFR30008LF1)
GFR30008LF1 is a genuine AirTAC GFR-series filter regulator: filtration and pressure regulation in one body, with no lubricator. This 300-size configuration takes compressed air through a 1/4 in PT port, uses the standard 40 um element for general plant-air protection, and sets downstream pressure with the low-pressure (L) regulator type. The polycarbonate bowl has a differential-pressure drain, and the embedded square pressure gauge reads in MPa. Maximum inlet pressure is 1.0 MPa (145 psi); with the differential-pressure drain the adjusting range is 0.15-0.9 MPa (20-130 psi), and because this is the low-pressure type we recommend confirming the exact setting limit for your application. Operating temperature is -5 to 70 C (non-freezing).
AirTAC builds the G-series in sizes 200, 300, 400 and 600, with ports from 1/8 in to 1 in, plus options for automatic or manual drains, the finer 5 um (W) element, square or round gauges in MPa, psi or bar scales, G (BSPP) or NPT threads, and bracket choice. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and the full datasheet for this model on request.
AirTAC GFR300-08 Filter Regulator (GFR30008LF1) Technical Specifications
| Model | AirTAC GFR300-08 Filter Regulator (GFR30008LF1) |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR300-08 Filter Regulator (GFR30008LF1)
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT1/4" · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-08 (two-unit set) |
Where the AirTAC GFR300-08 Filter Regulator (GFR30008LF1) Is Used
Palletizer clamp and pusher cylinders
Regulated air supplies the clamp and pusher cylinders on a palletizing cell, with the filter section removing water and pipe-scale before they reach the cylinder seals and directional valves.
Conveyor divert gate feed
Mounted at the drop feeding the gate cylinders that divert cartons between lanes on a distribution conveyor, giving line staff a single point to set and read the working pressure.
Workshop air tool drop
Installed at a maintenance-shop tool drop ahead of impact drivers and nailers, so the shop pressure is set once and coarse water and dirt are stripped out before the tools.
Is the AirTAC GFR300-08 Filter Regulator (GFR30008LF1) the Right Unit?
Match the size and port to your air demand: this is size 300 with a 1/4 in PT port, one step that suits general machine drops, while size 200 or sizes 400 and 600 cover lighter or heavier duties. Drain choice: the fitted differential-pressure drain discharges when the element loads up, automatic (A) empties without intervention, and manual (M) suits attended machines. The standard 40 um element covers most plant air; choose the W suffix for the 5 um element where finer protection matters. Gauge scale, thread (PT standard, G and NPT to order) and bracket complete the selections.
AirTAC publishes flow for this series as curves rather than one rated number, so share your inlet pressure, set pressure and air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR300-08 Filter Regulator (GFR30008LF1) FAQ
AirTAC publishes flow for this series as performance curves rather than a single rated figure, so there is no one rated number to quote. Send us your inlet pressure, set pressure and air demand, and we will read the curve against the datasheet and confirm sizing on request.
This model carries the standard 40 um element, which suits general plant air feeding cylinders, valves and air tools. The W suffix codes the optional 5 um element for points of use that need finer particle capture. If your application feeds small pilot passages or sensitive components, ask us to quote the W variant of the same size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC GFR300-08 Filter Regulator (GFR30008LF1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.