AirTAC GFR300-10 Filter Regulator (GFR30010ANW)
The AirTAC AirTAC GFR300-10 Filter Regulator (GFR30010ANW) is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/8" ports, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT3/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR300-10 Filter Regulator (GFR30010ANW)
The AirTAC GFR30010ANW is a filter regulator: filtration and pressure regulation combined in one body. This 300-size unit is built around a 3/8 in PT port. The W suffix selects the finer 5 um filter element instead of the standard 40 um, and the A suffix specifies an automatic drain, so collected condensate is expelled without manual attention. The N suffix means no gauge is fitted. Regulation range with automatic drain is 0.15-0.9 MPa (20-130 psi), max working pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). The polycarbonate bowl suits the 300 size.
This is a genuine AirTAC part from the G series, which spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in and PT, G (BSPP) or NPT thread options. AirTAC publishes flow performance as curves rather than a single rated figure, so we confirm the datasheet and sizing numbers on request before you order.
AirTAC GFR300-10 Filter Regulator (GFR30010ANW) Technical Specifications
| Model | AirTAC GFR300-10 Filter Regulator (GFR30010ANW) |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR300-10 Filter Regulator (GFR30010ANW)
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT3/8" · 5 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-10 (two-unit set) |
Where the AirTAC GFR300-10 Filter Regulator (GFR30010ANW) Is Used
CNC machine pneumatic supply
Feeds filtered, regulated air to a machining centre's tool-clamp and chip-clearing cylinders, with the 5 um element protecting precision valves from fine particulate and the auto drain handling condensate.
Laboratory air skid
Prepares clean, regulated compressed air for lab automation and analytical-instrument actuation, where the 5 um grade and unattended automatic drain keep the point-of-use supply stable.
Control-valve actuation panel
Serves as the air-preparation stage on a pneumatic control panel, delivering regulated air to positioners and pilot valves without a gauge when the panel carries its own instrumentation.
Is the AirTAC GFR300-10 Filter Regulator (GFR30010ANW) the Right Unit?
Choose size 300 with the 3/8 in port when your line flow sits above what a 200-size 1/4 in unit can pass; step up to 400 or 600 for larger demand, or down for compact circuits. The 5 um element here suits air feeding sensitive valves and instruments; pick the standard 40 um grade for general shop-air protection. Automatic drain suits unattended or hard-to-reach installations; manual and differential-pressure drains are also available in the family. This version has no gauge (order a gauge variant if you want visual setting), uses standard PT thread, and can be ordered without a bracket (J suffix) if panel or manifold mounting is preferred.
Flow for this family is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR300-10 Filter Regulator (GFR30010ANW) FAQ
AirTAC does not publish a single rated-flow figure for this unit; flow performance is given as curves in the datasheet. Contact us with your application demand and we will confirm the sizing from the datasheet on request.
The W suffix upgrades filtration from the standard 40 um to 5 um for finer protection of downstream valves and instruments, while the A suffix gives an automatic drain that expels condensate on its own - useful where bowls are not checked daily. A manual or differential-pressure drain version is available if you prefer.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC GFR300-10 Filter Regulator (GFR30010ANW)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.