AirTAC GFR400-10 Filter Regulator (GFR40010JC1WK)
The AirTAC AirTAC GFR400-10 Filter Regulator (GFR40010JC1WK) is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT3/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR400-10 Filter Regulator (GFR40010JC1WK)
The AirTAC GFR series combines filtration and pressure regulation in a single body: air is cleaned of water and particulate, then regulated downstream. This 400-size unit has a 3/8 in PT port, a 5 um filter element (W grade) for finer air than the 40 um standard, a differential-pressure drain bowl in polycarbonate, an external round gauge on the MPa scale, and a reverse (check) valve fitted so downstream pressure is held if the supply drops. Maximum inlet pressure is 1.0 MPa (145 psi) and the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi) with this drain type. Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, drain, filter-grade, gauge, thread and check-valve options. Flow is published as curves rather than a single rated figure, so ask us to confirm flow and datasheet details for your application before ordering.
AirTAC GFR400-10 Filter Regulator (GFR40010JC1WK) Technical Specifications
| Model | AirTAC GFR400-10 Filter Regulator (GFR40010JC1WK) |
|---|---|
| Series | GFR400 filter regulator |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR400-10 Filter Regulator (GFR40010JC1WK)
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · PT3/8" · 5 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-10 (two-unit set) |
Where the AirTAC GFR400-10 Filter Regulator (GFR40010JC1WK) Is Used
CNC machining centre air supply
Clean, regulated air feeding tool-changer and clamping circuits on a CNC machining centre, where the 5 um element protects precision valves from fine particulate.
Pneumatic press clamp circuits
Holding set pressure on pneumatic clamp and press fixtures, with the check valve maintaining downstream pressure during supply dips.
Modular conveyor gate control
Regulated air to diverter and gate cylinders on a sorting conveyor module, keeping actuator speed consistent as line pressure fluctuates.
Is the AirTAC GFR400-10 Filter Regulator (GFR40010JC1WK) the Right Unit?
Size 400 with a 3/8 in port suits mid-size air preparation. Step up or down a size if your line flow demands it - larger sizes carry larger ports and more flow, though flow is published as curves, not one rating. The 5 um element is the right pick where finer filtration matters; the 40 um grade is the standard alternative. The differential-pressure drain (default) purges the bowl automatically at higher flow, while manual (M) and automatic (A) drains are orderable options. The external round MPa gauge is fitted here; square-gauge and psi/bar scale versions exist. This code is PT thread; G (BSPP) and T (NPT) are catalogue options. J means no mounting bracket is supplied - order a bracket if you want panel fixing. Ask us to confirm sizing against the application datasheet before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC GFR400-10 Filter Regulator (GFR40010JC1WK) FAQ
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not quote one number here. Tell us your application and we will confirm the relevant flow and datasheet figures on request before you order.
The W-coded 5 um element filters finer than the 40 um standard, which suits sensitive directional valves and cylinders. The K-coded reverse (check) valve holds downstream pressure if the upstream supply fails - specify without K if you do not need that hold-in behaviour.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC GFR400-10 Filter Regulator (GFR40010JC1WK)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.