AirTAC GFR400-10 Filter Regulator (GFR40010MC1)
The AirTAC AirTAC GFR400-10 Filter Regulator (GFR40010MC1) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT3/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR400-10 Filter Regulator (GFR40010MC1)
The AirTAC GFR40010MC1 is a filter regulator: filtration and pressure regulation combined in one body, so the regulated air downstream is already cleaned. This configuration is the size 400 body with a PT3/8 port, the standard regulator type (adjustment 0.05-0.9 MPa with the manual drain), a standard 40 um filter element, a manual drain on the polycarbonate bowl, and an external round gauge on the MPa scale. A mounting bracket is included.
This is a genuine AirTAC part from the G series, which spans sizes 200, 300, 400 and 600 with ports from 1/8" to 1". Differential-pressure or automatic drains, a finer 5 um element, embedded square gauges and G (BSPP) or NPT threads are catalogue options. Flow is published as curves rather than a single rating, so we confirm the datasheet and sizing figures on request.
AirTAC GFR400-10 Filter Regulator (GFR40010MC1) Technical Specifications
| Model | AirTAC GFR400-10 Filter Regulator (GFR40010MC1) |
|---|---|
| Series | GFR400 filter regulator |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR400-10 Filter Regulator (GFR40010MC1)
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · PT3/8" · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-10 (two-unit set) |
Where the AirTAC GFR400-10 Filter Regulator (GFR40010MC1) Is Used
Packaging machine air prep
Feeds cartoning and wrapping machines from the plant ring main, cleaning the air and holding a steady regulator setpoint at the machine drop.
Conveyor diverters and stoppers
Supplies diverters, pushers and stopper cylinders on a conveyor line, where the MPa gauge lets line staff check the supply at a glance.
Maintenance shop air drops
Serves bench drops in a plant maintenance shop, where the manual drain suits scheduled weekly checks and the bracket fixes the unit to the wall or bench frame.
Is the AirTAC GFR400-10 Filter Regulator (GFR40010MC1) the Right Unit?
Size 400 with a 3/8" port is the mid-range step in the G series; match the body to your flow demand and step up if your line grows. The manual drain means an operator opens the bowl drain to remove accumulated condensate, and it brings the wider 0.05-0.9 MPa (7-130 psi) adjustment range; pick the differential-pressure or automatic drain if you cannot schedule drain checks. The standard 40 um element suits general machine air; specify W for the 5 um grade when valves need finer air. The round gauge reads in MPa, matching an SI-standard plant; psi and bar scales are available. The thread is PT as the standard, with G (BSPP) and NPT as orderable options.
Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR400-10 Filter Regulator (GFR40010MC1) FAQ
Flow for the G series is published as curves, not a single rated number, so we do not state one here. Share your application details and we will confirm the flow and sizing from the datasheet on request.
The M in the code means the bowl condensate is released by hand, which suits lines with scheduled checks. With the manual drain, the regulator adjusts over 0.05-0.9 MPa (7-130 psi); differential-pressure and automatic drain versions start from 0.15 MPa (20 psi).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC GFR400-10 Filter Regulator (GFR40010MC1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.