AirTAC GFR400-15 Filter Regulator (GFR40015AJF1K)
The AirTAC AirTAC GFR400-15 Filter Regulator (GFR40015AJF1K) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/2" ports, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/2"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR400-15 Filter Regulator (GFR40015AJF1K)
The GFR40015AJF1K is an AirTAC G-series filter regulator: filtration plus pressure regulation in a single 400-size body with a PT 1/2 in port, fitted with a reverse/check valve (K suffix). This configuration has an automatic drain, the standard 40 um filter element, an embedded square gauge with MPa scale, and is ordered without a mounting bracket. With automatic drain the regulation range is 0.15-0.9 MPa (20-130 psi); maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C (non-freezing). The 400 size uses a polycarbonate bowl; only the 600 size uses aluminium alloy.
This is a genuine AirTAC part. The G-series filter regulator range runs across sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and is configurable by drain type (differential-pressure, automatic or manual), filter grade (40 um standard, 5 um with W), gauge type and scale, thread (PT standard; G and NPT as catalogue options), bracket and check valve. Flow is published as curves, not a single rating, so we confirm the exact flow and datasheet figures for your application on request.
AirTAC GFR400-15 Filter Regulator (GFR40015AJF1K) Technical Specifications
| Model | AirTAC GFR400-15 Filter Regulator (GFR40015AJF1K) |
|---|---|
| Series | GFR400 filter regulator |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR400-15 Filter Regulator (GFR40015AJF1K)
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · PT1/2" · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-15 (two-unit set) |
Where the AirTAC GFR400-15 Filter Regulator (GFR40015AJF1K) Is Used
Automated assembly cell air prep
Conditions the supply to screwdriver feeders and pressing modules in an automated assembly cell, with the built-in check valve helping hold the regulated circuit when upstream air is interrupted.
Control panel of a packaging machine
Sits at the air inlet of a form-fill-seal machine's control panel, filtering and regulating the air feeding the pilot valves, with the MPa square gauge giving a clear set-point reference.
Hydraulic power pack pneumatics
Supplies regulated air to the pneumatic pilot and pump-unloading circuit of a hydraulic power pack, where the 40 um element keeps debris out of the small pilot valves.
Is the AirTAC GFR400-15 Filter Regulator (GFR40015AJF1K) the Right Unit?
Match the size series (200/300/400/600) and port to the line's flow demand; this 400-size unit has a 1/2 in PT port. The K suffix here adds a reverse/check valve - select K when you want that function built in, otherwise order the code without it. The automatic drain relieves you of manual condensate draining; manual and differential-pressure drains are the other options. Filtration is the standard 40 um element; add W for 5 um. The embedded square gauge reads in MPa; round external gauges and psi or bar scales are orderable. Thread is PT as standard with G (BSPP) and NPT as catalogue options, and a mounting bracket can be added since this code is without one. Flow is published as curves, not a single rating, so ask us to confirm sizing before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/2" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC GFR400-15 Filter Regulator (GFR40015AJF1K) FAQ
AirTAC publishes flow for the GFR400 series as curves, not as one rated number, so we do not quote a figure here. Share your inlet pressure, regulated set point and consumption and we will confirm the flow for this exact model from the datasheet on request before you order.
The K in GFR40015AJF1K means a reverse/check valve is fitted to the filter regulator, whereas the same code without K is supplied without one. Everything else decodes the same: 400 size, PT 1/2 in port, automatic drain, 40 um element and a square MPa gauge. This remains a filter regulator only - no lubrication function.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC GFR400-15 Filter Regulator (GFR40015AJF1K)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.