AirTAC GFR400-15 Filter Regulator (GFR40015MJF1W)
The AirTAC AirTAC GFR400-15 Filter Regulator (GFR40015MJF1W) is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/2" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1/2"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR400-15 Filter Regulator (GFR40015MJF1W)
The AirTAC GFR series combines a compressed-air filter and a pressure regulator in one body. This GFR40015MJF1W is the 400 size with a 1/2 in PT thread, a manual-drain polycarbonate bowl, and the 5 um (W) filter element for finer particle removal than the standard 40 um grade. The embedded square gauge is scaled in MPa, and the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi) on this manual-drain version. Maximum inlet pressure is 1.0 MPa (145 psi); operating temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with PT, G (BSPP) and NPT thread options, automatic, manual or differential-pressure drains, 5 um or standard 40 um elements, gauge and bracket options, and a check-valve (K) variant. Flow is published as a curve rather than a single rated number; ask us and we will confirm the datasheet figures for your application on request.
AirTAC GFR400-15 Filter Regulator (GFR40015MJF1W) Technical Specifications
| Model | AirTAC GFR400-15 Filter Regulator (GFR40015MJF1W) |
|---|---|
| Series | GFR400 filter regulator |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR400-15 Filter Regulator (GFR40015MJF1W)
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · PT1/2" · 5 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-15 (two-unit set) |
Where the AirTAC GFR400-15 Filter Regulator (GFR40015MJF1W) Is Used
Pneumatic supply to test benches
Feeds laboratory and QC test rigs that need clean, regulated compressed air at the bench, with the 5 um element guarding instruments and fittings from line particulate.
Control-valve positioner air
Supplies pneumatic positioners and control valve actuation on process lines, where the 5 um grade protects small orifice components and the regulator holds the signal-side supply steady.
Electronics assembly tooling
Prepares air for pick-and-place heads and small actuation on electronics assembly cells, filtering plant air to 5 um before it reaches delicate gripper circuits at a set pressure.
Is the AirTAC GFR400-15 Filter Regulator (GFR40015MJF1W) the Right Unit?
Pick the W suffix when the equipment downstream - valve stacks, cylinders or tooling with close clearances - needs finer filtration than the standard 40 um element provides; 5 um is the finer of the two published grades for this series. This 400 body serves 1/2 in piping; drop to the 300 size for 3/8 in lines or step to the 600 for larger headers. The M drain means manual venting, suited to installations with daily operator checks; choose automatic or differential-pressure drain codes where the bowl must clear itself. The square gauge reads in MPa, with psi and bar scales and an external round gauge available as catalogue options. PT is the standard thread and G or NPT versions are ordered as specifications. The J suffix means no mounting bracket is included. Because flow appears as curves and not a single rating, send us your application details and we will confirm sizing against the datasheet before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/2" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR400-15 Filter Regulator (GFR40015MJF1W) FAQ
AirTAC publishes the flow of this model as a curve across pressures rather than a single rated figure, so we do not state one number. Share your working pressure and consumption and we will confirm the datasheet figures for your operating point on request before you order.
The W suffix fits the 5 um element for finer particle removal than the 40 um standard grade - the choice for instrumentation, positioners and delicate tooling. Note that both grades drain through the same bowl, and the drain code (M here for manual, A for automatic, blank for differential-pressure) is selected independently of the filter grade.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC GFR400-15 Filter Regulator (GFR40015MJF1W)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.