AirTAC GFR600-25 Filter Regulator (GFR60025MC1)
The AirTAC AirTAC GFR600-25 Filter Regulator (GFR60025MC1) is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizePT1"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade40 µm
- DrainManual drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GFR600-25 Filter Regulator (GFR60025MC1)
The AirTAC GFR60025MC1 filters and regulates compressed air in one body: water and particulate are removed while downstream pressure is held at the set point. This 600-size unit has a 1 in PT port, the standard 40 um element and a manual drain, which also widens the regulator adjustment range to 0.05-0.9 MPa (7-130 psi). The C1 suffix specifies an external round pressure gauge with MPa scale, and the mounting bracket is included; the 600 frame uses an aluminium alloy bowl.
This is a genuine AirTAC part from the G-series, spanning 200, 300, 400 and 600 sizes with G (BSPP) and NPT thread options, 40 um or 5 um elements, and automatic, manual or differential-pressure drains. Flow is published as curves rather than a single rating, so we confirm sizing and full datasheet figures on request.
AirTAC GFR600-25 Filter Regulator (GFR60025MC1) Technical Specifications
| Model | AirTAC GFR600-25 Filter Regulator (GFR60025MC1) |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GFR600-25 Filter Regulator (GFR60025MC1)
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Where the AirTAC GFR600-25 Filter Regulator (GFR60025MC1) Is Used
Maintenance-shop air drops
A regulated drop in a plant maintenance shop feeding air tools, blow guns and test rigs, where the manual drain suits supervised, shift-based equipment care.
Laboratory and test-bench air supplies
Filtering and regulating house air to test benches and pilot-scale rigs, with the round MPa gauge and wide 0.05 MPa minimum setting supporting careful low-pressure setups.
Fixture clamping on machine tool benches
Supplying air to clamps and swing cylinders on machining and assembly benches, where the included bracket simplifies panel mounting at the point of use.
Is the AirTAC GFR600-25 Filter Regulator (GFR60025MC1) the Right Unit?
Step through the 200/300/400/600 sizes against required air flow; this 600 unit carries the largest port at 1 in PT. Manual drain (M) is the right choice where an operator drains the bowl on a schedule or where you need the wider 0.05 MPa minimum setting; choose automatic or differential-pressure drain variants for unattended operation. The standard 40 um element suits general plant air; add W for a 5 um element. The round MPa gauge is specified on this code, and the bracket is included. Thread is PT as standard with G (BSPP) and NPT as orderable options. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC GFR600-25 Filter Regulator (GFR60025MC1) FAQ
AirTAC gives G-series flow as pressure-drop curves rather than one rated figure, so we do not quote a single number. Share your supply pressure, set pressure and air consumption and we will verify the 600 size on the curve and provide the datasheet on request.
The manual drain (M) is operated by hand on a schedule, which suits supervised installations - and on the GFR family it also widens the regulator adjustment range to 0.05-0.9 MPa (7-130 psi), versus 0.15-0.9 MPa (20-130 psi) for automatic and differential-pressure drain versions. Automatic and differential-pressure types drain unattended. This unit keeps the standard 40 um element and adds a round MPa gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC GFR600-25 Filter Regulator (GFR60025MC1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.