The AirTAC AirTAC GFR60025AJF2WG Filter Regulator G1 (1 in) 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600 is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure at a set point in a single body. This GFR60025AJF2WG is the size-600 unit with a G1 (1 in) G-thread port, a 5 um filter element (code W, versus the 40 um standard), an automatic drain that ejects condensate without operator attention, an embedded square gauge reading in psi, and no mounting bracket. The aluminium-alloy bowl suits this large size, and the standard regulator adjusts from 0.15 to 0.9 MPa (20-130 psi) with a maximum inlet pressure of 1.0 MPa (145 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options include manual or differential-pressure drains, a 40 um element, MPa or bar gauge scales, an external round gauge, a reverse/check valve, a mounting bracket, and PT or NPT threads in place of G. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet and flow figures for your application before ordering.
| Model | AirTAC GFR60025AJF2WG Filter Regulator G1 (1 in) 5 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 5 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Filtering and regulating shop air feeding paint spray booths, where the 5 um element and a held set point protect finish quality on vehicle panels.
Supplying clean, regulated air to the cylinders and grippers that close and stack cartons on a packaging conveyor, with the automatic drain handling condensate on a line that runs unattended.
Conditioning the air that actuates tool clamps and part ejectors on a CNC machining cell, with the psi gauge giving operators a local set-point readout.
Choose the size and port step (200 through 600, 1/8 in to 1 in) against the air demand of your circuit; this size-600 unit carries a G1 (1 in) port for high-flow lines. Pick the drain: automatic (fitted here) for unattended condensate removal, manual for controlled purging, or differential-pressure as the default. Pick the element grade: 5 um as fitted, or the 40 um standard for coarser protection. Gauge scale (MPa, psi or bar), thread (PT standard, G or NPT to order), bracket and reverse/check valve are all decodable options.
Flow for this family is published as curves, not a single rated figure, so send us your line pressure and air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR600 as curves rather than a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the flow from the datasheet on request.
This unit is coded A for an automatic drain, which ejects collected condensate without operator attention - useful on unmanned lines. The GFR600 is also available with a manual drain or the differential-pressure default. Note the regulation range differs by drain type: 0.15-0.9 MPa (20-130 psi) for automatic and differential-pressure drains, 0.05-0.9 MPa (7-130 psi) for manual.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.