AirTAC GR200-06 Pressure Regulator (GR20006C2)
The AirTAC AirTAC GR200-06 Pressure Regulator (GR20006C2) is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Pressure typeStandard type
- Pressure gaugeFitted
- Reflux valveNot fitted
- ThreadPT
- BracketFixing bracket included
About the AirTAC GR200-06 Pressure Regulator (GR20006C2)
GR20006C2 is an AirTAC G-series air pressure regulator: regulation only, with no filter element and no drain bowl. This configuration is set up for 1/8 in PT threaded ports and carries a round external pressure gauge with psi scale, so settings can be read directly in US units. The regulating range is 0.05-0.9 MPa (7-130 psi), the maximum inlet pressure is 1.0 MPa (145 psi), and the working temperature range is -20 to 70 C.
This is a genuine AirTAC part from the GR series, which spans sizes 200, 300, 400 and 600 so port size and capacity can step up with your line. Alternative thread options (G/BSPP or NPT), a no-gauge version, a low-pressure type and panel mounting are catalogue options. Because AirTAC publishes flow as curves rather than a single rating, we confirm the datasheet and sizing figures on request before you order.
AirTAC GR200-06 Pressure Regulator (GR20006C2) Technical Specifications
| Model | AirTAC GR200-06 Pressure Regulator (GR20006C2) |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GR200-06 Pressure Regulator (GR20006C2)
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GR200-06 Pressure Regulator (GR20006C2) Is Used
Air tables and clamps on production fixtures
Gives technicians a psi-read dial-in point for the fixture clamp and air-table circuits on a small production cell fed from a 1/8 in drop.
Instrument air on laboratory bench setups
Provides a finely adjustable, psi-calibrated supply to pneumatic lab apparatus and bench-top testers that need a steady, repeatable setpoint.
Trailer and dock equipment air points
Regulates the branch feeding dock-leveler controls and trailer air tools at a loading bay, where reading the setpoint in psi keeps checks quick.
Is the AirTAC GR200-06 Pressure Regulator (GR20006C2) the Right Regulator?
Size 200 with 1/8 in PT ports fits compact branch lines and small actuators; move up to GR300, GR400 or GR600 where demand is higher. The gauge scale is a real choice here: this model reads in psi, while C1 reads MPa and C3 reads bar, so pick the scale your technicians and gauges already use. Thread is PT as standard, with G and NPT available as catalogue options, and a mounting bracket is included unless the J suffix is ordered. Add K to the code if you need a reverse/check valve fitted.
Flow is shown in the catalogue as curves, not a single rated number, so ask us to confirm sizing against the datasheet for your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.9 MPa (7 - 130 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC GR200-06 Pressure Regulator (GR20006C2) FAQ
There is no single rated flow figure: AirTAC publishes regulator capacity as flow curves across pressure and porting conditions. Send us your inlet pressure and required downstream flow and we will confirm the correct size from the datasheet on request.
The gauge code sets the scale of the round external gauge: C1 is MPa, C2 is psi and C3 is bar. Choose the scale that matches the other instruments on your machine or panel so operators never convert readings. The regulating range itself is the same on all three.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GR200-06 Pressure Regulator (GR20006C2)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.