AirTAC GR200-06 Pressure Regulator (GR20006F1)
The AirTAC AirTAC GR200-06 Pressure Regulator (GR20006F1) is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Pressure typeStandard type
- Pressure gaugeFitted
- Reflux valveNot fitted
- ThreadPT
- BracketFixing bracket included
About the AirTAC GR200-06 Pressure Regulator (GR20006F1)
The AirTAC GR series is a dedicated air pressure regulator for compressed air only: it reduces and holds downstream pressure, with no filter, no drain bowl and no lubricator in the body. This GR20006F1 is the 200 size with a 1/8 in PT port and an embedded square gauge reading in MPa, which matches the units used on most AirTAC and Asian-market pneumatic drawings. Adjustment range is 0.05-0.9 MPa (7-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -20 to 70 C (non-freezing).
This is a genuine AirTAC part. The GR family spans 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, PT standard thread plus G (BSPP) and NPT options, round or square gauges in MPa, psi or bar scales, a low-pressure type limited to 0.4 MPa, and bracket or panel mounting. Flow is published as curves rather than a single rated figure, so we will confirm the datasheet flow data for your application on request.
AirTAC GR200-06 Pressure Regulator (GR20006F1) Technical Specifications
| Model | AirTAC GR200-06 Pressure Regulator (GR20006F1) |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GR200-06 Pressure Regulator (GR20006F1)
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GR200-06 Pressure Regulator (GR20006F1) Is Used
Reject pusher cylinders on a bottling conveyor
Holds a steady supply pressure to the air cylinder that kicks off-spec bottles from the line, keeping the push stroke consistent batch after batch.
Fume-hood sash counterbalance air supply
Provides a regulated air branch feeding the pneumatic assist on a laboratory fume hood so sash movement feels the same regardless of header swings.
Bench pneumatic punching fixture
Sits upstream of a small punch or forming cylinder at a workbench, letting the operator dial in and lock the working pressure for repeatable hits.
Is the AirTAC GR200-06 Pressure Regulator (GR20006F1) the Right Regulator?
Choose the 200 size in 1/8 in for compact branches and small actuators; move to 300, 400 or 600 where the port and flow demand grow. This version's F1 gauge is the square style scaled in MPa; pick F2 for psi or C3 for a round bar gauge if your team works in other units. The thread is PT as standard, with G (BSPP) and NPT available as orderable options. A bracket is included unless you order the J suffix, and the L low-pressure type covers setpoints up to 0.4 MPa. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.9 MPa (7 - 130 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC GR200-06 Pressure Regulator (GR20006F1) FAQ
AirTAC does not publish a single rated flow number for the GR series; performance is given as flow curves against pressure. Share your inlet pressure, setpoint and demand and we will confirm the datasheet flow data for this exact 1/8 in model on request.
It defines the gauge: F is the embedded square gauge style and 1 sets its scale to MPa. Order F2 for a psi scale, C3 for a round bar gauge, or N if you want the regulator with no gauge at all.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GR200-06 Pressure Regulator (GR20006F1)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.