AirTAC GR200-06 Pressure Regulator (GR20006F3)
The AirTAC AirTAC GR200-06 Pressure Regulator (GR20006F3) is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Pressure typeStandard type
- Pressure gaugeFitted
- Reflux valveNot fitted
- ThreadPT
- BracketFixing bracket included
About the AirTAC GR200-06 Pressure Regulator (GR20006F3)
The GR20006F3 is an AirTAC GR-series air pressure regulator in the 200 size with a 1/8 inch PT port. This family regulates downstream pressure only - it contains no filter, no drain bowl and no lubricator. Adjustment range is 0.05-0.9 MPa (7-130 psi) on compressed air, with a maximum inlet pressure of 1.0 MPa (145 psi) and a working temperature range of -20 to 70 C. The F3 suffix gives the embedded square gauge on a bar scale, and the mounting bracket is included as standard.
This is a genuine AirTAC part. The GR series spans 200/300/400/600 sizes with ports from 1/8 to 1 inch, G (BSPP) and NPT thread options, a low-pressure type (L) limited to 0.4 MPa, a reverse/check valve option (K), and a panel-mountable body. Flow is published as curves rather than a single rated figure; we confirm flow and datasheet details on request.
AirTAC GR200-06 Pressure Regulator (GR20006F3) Technical Specifications
| Model | AirTAC GR200-06 Pressure Regulator (GR20006F3) |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GR200-06 Pressure Regulator (GR20006F3)
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GR200-06 Pressure Regulator (GR20006F3) Is Used
Clamping fixtures on a CNC machining centre
Set and hold a steady supply pressure to hydraulic-free pneumatic clamp cylinders so workpieces are gripped consistently part after part without over-pressurising the fixture.
Spray gun supply at a finishing booth
Trim the compressed air feed to manual or automatic spray guns so atomising and fan-control air is delivered at the pressure the gun and coating process were set up for.
Sealing-jaw cylinders on a bagging machine
Regulate the air to heat-seal jaws and product pushers on packaging lines so seal force and cycle behaviour stay repeatable across shifts.
Is the AirTAC GR200-06 Pressure Regulator (GR20006F3) the Right Regulator?
The 200 size with a 1/8 inch port is the smallest step in the GR range; step up to 300/400/600 when the application needs a larger port and higher flow. Choose the gauge you want: the embedded square gauge is standard, with an external round gauge (C) available on MPa (1), psi (2) or bar (3) scales. This code carries no J, so the bracket is included; specify J to omit it, and K if you need a reverse/check valve. PT is the standard thread; G (BSPP) and NPT are catalogue options to order. Because GR flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.9 MPa (7 - 130 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC GR200-06 Pressure Regulator (GR20006F3) FAQ
AirTAC publishes GR performance as flow curves rather than a single rated figure, so there is no one rated flow number we can quote. Share your application's flow and pressure needs and we will confirm the right size from the datasheet on request.
The gauge letter sets the gauge style and the digit sets the scale: F is the embedded square gauge, C is the external round gauge, and the scale digit is 1 for MPa, 2 for psi or 3 for bar. F3 therefore means the square gauge reading in bar.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GR200-06 Pressure Regulator (GR20006F3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.