AirTAC GR200-06 Pressure Regulator (GR20006JF3)
The AirTAC AirTAC GR200-06 Pressure Regulator (GR20006JF3) is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Pressure typeStandard type
- Pressure gaugeFitted
- Reflux valveNot fitted
- ThreadPT
- BracketSupplied without bracket
About the AirTAC GR200-06 Pressure Regulator (GR20006JF3)
The GR20006JF3 is an AirTAC G-series air pressure regulator for compressed air only. It reduces an incoming supply to a set downstream pressure and holds it steady; it contains no filter or bowl, so pair it with upstream filtration where the air needs cleaning or drying. This size 200 unit has PT1/8 ports, the embedded square gauge with a bar scale, and the J code means no mounting bracket is included.
This is a genuine AirTAC part from the GR series, which runs from size 200 up to size 600 with alternative ports, gauge styles and scales, a low-pressure (L) type and an optional reverse/check valve (K). Maximum inlet pressure is 1.0 MPa (145 psi), the setting range is 0.05-0.9 MPa (7-130 psi), and the operating temperature range is -20 to 70 C. Because flow is published as curves rather than a single rating, we confirm flow and datasheet figures on request.
AirTAC GR200-06 Pressure Regulator (GR20006JF3) Technical Specifications
| Model | AirTAC GR200-06 Pressure Regulator (GR20006JF3) |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GR200-06 Pressure Regulator (GR20006JF3)
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GR200-06 Pressure Regulator (GR20006JF3) Is Used
Packaging machine air supply
Sets a stable operating pressure for sealing bars and small cylinders on packaging machines, independent of factory header pressure swings.
Paint and coating spray setups
Gives operators a bar-reading adjustment point for atomising and actuating air on spray stations, tuned once and locked in for the run.
Maintenance shop drop lines
Fits on workshop air drops to set tool supply pressure per bench, protecting small tools and cylinders from over-pressure.
Is the AirTAC GR200-06 Pressure Regulator (GR20006JF3) the Right Regulator?
Confirm your regulation span first: 0.05-0.9 MPa (7-130 psi) downstream from up to 1.0 MPa inlet, or specify the L low-pressure code for lower set points. Size 200 with PT1/8 ports is the smallest step in the GR range; sizes 300/400/600 give larger ports and more flow. This version's embedded square gauge reads in bar; MPa and psi scales and round gauges are alternative codes, and the K suffix adds a reverse/check valve where you need pressure retention. Choose the G (BSPP) or T (NPT) thread suffix instead of the standard PT thread to match your pipework, and add the bracket option for panel mounting. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.9 MPa (7 - 130 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC GR200-06 Pressure Regulator (GR20006JF3) FAQ
AirTAC publishes GR-series flow as curves rather than a single rated figure, so no flow number appears here. Share your application details and we will confirm the flow performance from the datasheet curves on request before you place the order.
The F3 code selects the embedded square gauge with a bar scale; F1 would be MPa, and round C-type gauges with other scales are also catalogue options. The regulator itself is identical - only the gauge scale differs - so choose the scale that matches the rest of your instruments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GR200-06 Pressure Regulator (GR20006JF3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.