AirTAC GR200-06 Pressure Regulator (GR20006LC3G)
The AirTAC AirTAC GR200-06 Pressure Regulator (GR20006LC3G) is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.4 MPa (7 - 58 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.4 MPa (7 - 58 psi)
- Pressure typeLow-pressure type
- Pressure gaugeFitted
- Reflux valveNot fitted
- ThreadG (BSPP)
- BracketFixing bracket included
About the AirTAC GR200-06 Pressure Regulator (GR20006LC3G)
The GR20006LC3G is a genuine AirTAC G-series air pressure regulator in the compact size 200 body. It reduces and holds downstream pressure on a compressed-air line; the L code makes this the low-pressure type, adjustable up to 0.4 MPa. The 06 position gives a 1/8in port, and the trailing G specifies G (BSPP) thread - PT is the G-series standard and NPT is a catalogue option, so this variant is aimed at BSPP pipework. The C3 option specifies an external round pressure gauge with a bar scale. There is no filter, bowl or lubricator here - it regulates pressure only, with a maximum inlet pressure of 1.0 MPa (145 psi) and an operating range of -20 to 70 C (non-freezing).
Across the G-series, the GR regulator line runs from size 200 to 600 with ports from 1/8in to 1in, in standard or low-pressure versions, with or without a gauge, and with G (BSPP) or NPT thread variants, panel mounting and a reverse/check valve (K) available to order. AirTAC publishes flow as characteristic curves rather than a single rated number, so we confirm the datasheet and sizing figures for you on request.
AirTAC GR200-06 Pressure Regulator (GR20006LC3G) Technical Specifications
| Model | AirTAC GR200-06 Pressure Regulator (GR20006LC3G) |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Regulating range | 0.05 - 0.4 MPa (7 - 58 psi) |
| Pressure type | Low-pressure type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GR200-06 Pressure Regulator (GR20006LC3G)
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| L | Low-pressure type — 0.05 - 0.4 MPa (7 - 58 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.4 MPa (7 - 58 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GR200-06 Pressure Regulator (GR20006LC3G) Is Used
Valve actuator pilot supply
Regulates a stable low-pressure pilot feed to a pneumatically actuated process valve on a skid built to BSPP piping standards.
Small press fixture control
Holds a reduced, repeatable setting to the air cylinder of a light-duty press or marking fixture, protecting thin or soft parts from over-force.
Workshop air drop for hand tools
Lets a technician dial in a low, fixed supply pressure at a 1/8in BSPP take-off point for air brushes, blow guns and other small air tools.
Is the AirTAC GR200-06 Pressure Regulator (GR20006LC3G) the Right Regulator?
Size 200 with a 1/8in port suits compact, low-consumption circuits; step up to 300/400/600 when the line needs a larger port and more flow. The L code selects the low-pressure type, adjustable up to 0.4 MPa - order the standard GR if your settings sit in the 0.05-0.9 MPa band. This code carries G (BSPP) thread; if your piping is PT or NPT, tell us and we will quote the matching catalogue variant. The C3 option gives a round external gauge with a bar scale; F codes select the square gauge (scales 1 = MPa, 2 = psi, 3 = bar) and N deletes the gauge. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.4 MPa (7 - 58 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC GR200-06 Pressure Regulator (GR20006LC3G) FAQ
AirTAC publishes regulator flow as characteristic curves, not as a single rated figure, so there is no one-number rating we can quote for this model. Send us your inlet pressure, set pressure and expected air consumption and we will confirm the sizing against the datasheet curves before you order.
The trailing G specifies G (BSPP) thread on the 1/8in port; PT is the G-series standard and NPT is a catalogue option to order. The C3 option specifies a round external pressure gauge with a bar scale - without a gauge code the unit carries the embedded square gauge with an MPa scale.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GR200-06 Pressure Regulator (GR20006LC3G)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.