AirTAC GR200-06 Pressure Regulator (GR20006LN)
The AirTAC AirTAC GR200-06 Pressure Regulator (GR20006LN) is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.4 MPa (7 - 58 psi) with PT1/8" ports, ordered without a gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.4 MPa (7 - 58 psi)
- Pressure typeLow-pressure type
- Pressure gaugeNot fitted
- Reflux valveNot fitted
- ThreadPT
- BracketFixing bracket included
About the AirTAC GR200-06 Pressure Regulator (GR20006LN)
GR20006LN is an AirTAC G-series air pressure regulator: regulation only, with no filter element and no lubricator. This is the 200 size with a PT 1/8in port, the low-pressure (L) type whose setting range extends up to 0.4 MPa, supplied without a gauge (N) and with the mounting bracket included as standard. It reduces and holds a stable downstream pressure from a compressed-air supply, with an operating temperature of -20 to 70 C.
This is a genuine AirTAC part, bought from the catalogue as an original component. The G-series regulator line runs from size 200 up to 600, with larger port sizes, PT/G/NPT thread options, standard or low-pressure regulation, gauge and reverse-valve options, and bracket choices. Because rated flow for these units is published as curves rather than a single figure, we confirm the datasheet flow numbers for your application on request.
AirTAC GR200-06 Pressure Regulator (GR20006LN) Technical Specifications
| Model | AirTAC GR200-06 Pressure Regulator (GR20006LN) |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (PT thread) |
| Regulating range | 0.05 - 0.4 MPa (7 - 58 psi) |
| Pressure type | Low-pressure type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GR200-06 Pressure Regulator (GR20006LN)
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| L | Low-pressure type — 0.05 - 0.4 MPa (7 - 58 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.4 MPa (7 - 58 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GR200-06 Pressure Regulator (GR20006LN) Is Used
Pneumatic clamping on a small fixture
Set and hold a low clamping pressure on an air-actuated clamp cylinder in a machining fixture, where the low-pressure (L) range up to 0.4 MPa is the working band.
Wall-mounted regulator station on a workbench
Mount a dedicated low-pressure air take-off on a workshop wall or machine frame using the included bracket, giving operators a fixed 1/8in adjustment point.
Maintenance-shop air drop regulation
Feed a maintenance-shop air drop or hose reel station with regulated low-pressure air for blowing, testing and light tool work.
Is the AirTAC GR200-06 Pressure Regulator (GR20006LN) the Right Regulator?
The 200 size with a 1/8in port is the smallest step in the GR line, so match it to a circuit whose required flow sits comfortably in the low end of the G-series flow curves - step up to 300, 400 or 600 if your demand is higher. The low-pressure (L) type in this code covers regulation up to 0.4 MPa; if your setpoint needs more, order the standard type instead. This code includes the mounting bracket (blank bracket position), has no gauge (N), and takes PT thread as standard with G or NPT available as catalogue options. GR regulators can also be panel-mounted.
Because AirTAC publishes flow as curves rather than a single rated number, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.4 MPa (7 - 58 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC GR200-06 Pressure Regulator (GR20006LN) FAQ
AirTAC does not publish a single rated flow figure for GR regulators - flow is given as performance curves. Send us your line pressure and air demand and we will confirm the datasheet flow figures for this exact unit on request before you order.
Yes - in this code the bracket position is blank, which means the mounting bracket is included; the J version (no bracket) omits it. Beyond that, the code decodes as the 200 size, PT 1/8in port, low-pressure (L) type, and no gauge (N).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GR200-06 Pressure Regulator (GR20006LN)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.