AirTAC GR200-06 Pressure Regulator (GR20006N)
The AirTAC AirTAC GR200-06 Pressure Regulator (GR20006N) is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, ordered without a gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Pressure typeStandard type
- Pressure gaugeNot fitted
- Reflux valveNot fitted
- ThreadPT
- BracketFixing bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GR200-06 Pressure Regulator (GR20006N)
The GR20006N is a genuine AirTAC G-series air pressure regulator in the compact 200 size, with a decoded PT1/8 port. It reduces and holds downstream air pressure anywhere in the 0.05-0.9 MPa (7-130 psi) setting range, with a maximum working (inlet) pressure of 1.0 MPa (145 psi). This is the plain regulating configuration: no gauge is fitted, and as a regulator it contains no filter, no bowl and no lubricator - medium is compressed air only. Operating temperature is -20 to 70 C.
AirTAC's G-series regulator line spans 200, 300, 400 and 600 sizes with ports from 1/8 in. to 1 in. and PT, G (BSPP) or NPT threads, plus panel-mounting, low-pressure (L) and check-valve (K) options. Flow data is published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
AirTAC GR200-06 Pressure Regulator (GR20006N) Technical Specifications
| Model | AirTAC GR200-06 Pressure Regulator (GR20006N) |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GR200-06 Pressure Regulator (GR20006N)
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GR200-06 Pressure Regulator (GR20006N) Is Used
Pneumatic control valve supply
Set a stable pilot pressure feeding solenoid and pneumatic control valves on a packaging machine, so the valve stack sees a consistent downstream setting instead of full header pressure.
Test bench and lab air lines
Trim air pressure on a leak-test or instrument bench where small-bore 1/8 in. lines supply gauges, reference tools or small actuators at a fixed, repeatable setting.
Pick-and-place actuator circuit
Regulate the supply to small-bore cylinder circuits on an assembly or pick-and-place station, holding the working pressure at the level the mechanism was designed around.
Is the AirTAC GR200-06 Pressure Regulator (GR20006N) the Right Regulator?
Real choices in the G-series regulator line: step up from 200 to 300, 400 or 600 for a larger port and more flow; choose the gauge (blank = embedded square gauge on MPa scale, C = external round gauge with scale 1 MPa / 2 psi / 3 bar, N = no gauge, as here); thread is PT standard with G (BSPP) or T (NPT) available to order; J deletes the bracket, K adds a reverse/check valve, and L selects the low-pressure type limited to 0.4 MPa. Flow is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.9 MPa (7 - 130 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC GR200-06 Pressure Regulator (GR20006N) FAQ
AirTAC publishes regulator flow as curves against inlet and set pressure rather than a single rated figure, so we do not quote one number here. Send us your required flow and operating pressures and we will confirm the sizing against the datasheet on request.
N means this unit is supplied without a gauge. If you want indication, order a plain code for the embedded square gauge (MPa scale) or a C code such as GR20008C1 for an external round gauge, with scale 1 = MPa, 2 = psi or 3 = bar.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GR200-06 Pressure Regulator (GR20006N)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.