AirTAC GR200-08 Pressure Regulator (GR20008LF3)
The AirTAC AirTAC GR200-08 Pressure Regulator (GR20008LF3) is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.4 MPa (7 - 58 psi) with PT1/4" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/4"
- Regulating range0.05 - 0.4 MPa (7 - 58 psi)
- Pressure typeLow-pressure type
- Pressure gaugeFitted
- Reflux valveNot fitted
- ThreadPT
- BracketFixing bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GR200-08 Pressure Regulator (GR20008LF3)
GR20008LF3 is a genuine AirTAC GR-series air pressure regulator: pressure regulation only, with no bowl, no filter grade and no oil mist in this unit. It is a size 200 body with a 1/4 inch PT thread, the low-pressure type (L) adjustable up to 0.4 MPa, and it carries an embedded square gauge scaled in bar. The blank bracket position means the mounting bracket is included. Working medium is compressed air; operating temperature is -20 to 70 C.
This is a catalogue AirTAC part. Across the GR range you can move to sizes 300, 400 and 600 for larger ports, order G (BSPP) or NPT threads, and choose MPa- or psi-scale gauges or no gauge at all. Because flow is published as curves and not one rated number, ask us to confirm flow and datasheet figures for your application on request.
AirTAC GR200-08 Pressure Regulator (GR20008LF3) Technical Specifications
| Model | AirTAC GR200-08 Pressure Regulator (GR20008LF3) |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/4" (PT thread) |
| Regulating range | 0.05 - 0.4 MPa (7 - 58 psi) |
| Pressure type | Low-pressure type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GR200-08 Pressure Regulator (GR20008LF3)
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| L | Low-pressure type — 0.05 - 0.4 MPa (7 - 58 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/4" · 0.05 - 0.4 MPa (7 - 58 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GR200-08 Pressure Regulator (GR20008LF3) Is Used
European-built machine retrofits
Drop in a point-of-use regulator on imported packaging or printing machinery whose pneumatic drawings are specified in bar, keeping the panel readouts consistent with the OEM documentation.
Trailer and body-building air take-offs
Feed low-pressure air take-offs for doors, tail-lifts or test rigs in a vehicle body shop, setting gentle pressures on a compact 1/4 inch drop mounted on the included bracket.
Pilot-scale process rigs
Trim sparging, purging or actuator air on a pilot plant skid that runs at low settings, with the bar-scale square gauge letting engineers record setpoints directly in process units.
Is the AirTAC GR200-08 Pressure Regulator (GR20008LF3) the Right Regulator?
Match the size to your pipe and demand: 200 with a 1/4 inch PT port here, stepping to GR300/400/600 when the flow call grows. The L code sets this as the low-pressure type with adjustment up to 0.4 MPa; choose a standard GR for higher setpoints up to 0.9 MPa. This unit's square gauge reads in bar (F3), a natural fit for European-drawn machinery panels; F1 and F2 give MPa and psi. Thread is PT as the standard on this code, with G and NPT as order options, and the bracket is included. Flow appears only as curves in the datasheet - ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.4 MPa (7 - 58 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC GR200-08 Pressure Regulator (GR20008LF3) FAQ
There is no single rated flow figure for this regulator - AirTAC publishes capacity as flow curves. Tell us your supply pressure, set pressure and air demand, and we will confirm the flow figures for the GR20008LF3 from the datasheet on request.
The suffix after F sets the scale of the embedded square gauge: F3 reads in bar, F2 in psi and F1 in MPa. All three are the same low-pressure (L) regulator, size 200 with a 1/4 inch PT port - pick the scale your operators and drawings use.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GR200-08 Pressure Regulator (GR20008LF3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.