Airtac HLH Side Rail Type Precision Slide Cylinder HLH16x40-S
The AirTAC Airtac HLH Side Rail Type Precision Slide Cylinder HLH16x40-S is a genuine HLH slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a miniature linear roller-ball guide so the table travels straight with high rigidity and low deflection. It delivers about 80.4 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideminiature linear roller-ball guide
- Bore16 mm
- Push thrust @0.5 MPa80.4 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLH Side Rail Type Precision Slide Cylinder HLH16x40-S
A slide-table cylinder integrates an air cylinder with a linear guide so the moving table follows a precise straight path. The AirTAC HLH16X40-S is a double-acting dual-rod slide table featuring a precision miniature linear roller-ball integrated guide that delivers the best straightness and precision assembly among the HL sub-families. The dual rod doubles thrust versus a single-rod design, and a floating joint prevents side torque from reaching the rods. With a 16 mm bore and 40 mm stroke, this model provides moderate thrust for compact guided-motion tasks. The HLH series allows four-direction mounting and three port groups for flexible machine integration.
This is a genuine AirTAC part. A sintered NdFeB magnet is standard on every unit, with magnetic-switch slots on the body that accept AirTAC CMSH, DMSH, and EMSH sensor switches. We confirm the exact thrust, dimensions, allowable load, and moment values from the AirTAC datasheet or on-page specification table on request.
Airtac HLH Side Rail Type Precision Slide Cylinder HLH16x40-S Technical Specifications
| Model | Airtac HLH Side Rail Type Precision Slide Cylinder HLH16x40-S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLH (miniature linear roller-ball guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 80.4 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Pick the HLH sub-family when you need maximum straightness and precision-assembly quality in a guided slide. The 16 mm bore gives moderate thrust; select bore 20 for higher push force if your payload demands it. The 40 mm stroke must be within the HLH bore-16 stroke range in the AirTAC catalog. HLH uses no adjuster or shock-absorber options; end-of-stroke cushioning is via TPU bumper. Thread is PT as standard; request G or NPT thread for alternate fittings. We verify allowable load, moment, and deflection from published datasheet tables and curves so you can size with confidence.
Applications
Precision Pick-and-Place
Roller-ball straightness positions delicate sensors or connectors over a 40 mm stroke with repeatable accuracy on a compact 16 mm bore platform.
Stopper Slide Station
Four-way mounting and bumper cushion let the HLH16 act as a guided stopper that arrests a small workpiece carrier at a defined 40 mm travel point.
Multi-Port Assembly Fixture
Three port groups and dual-rod rigidity fit the HLH16 into a dense assembly fixture where a 40 mm stroke drives a pressing, probing, or alignment operation.
FAQ
How do I choose between HLH bore 16 and bore 20 for my application?
Bore 16 provides moderate thrust for small to mid-range guided loads. Bore 20 offers higher thrust if your payload or friction requires more push force. Both share the same miniature roller-ball guide, four-direction mounting, and three port groups. We confirm the exact thrust for each bore from the datasheet spec table so you can match it to your load requirement.
What speed range can I expect from the HLH16X40-S?
The rated speed range is 50-500 mm/s. Use meter-out speed control to stay within this range and avoid end-of-stroke impact. Maximum operating pressure is 0.7 MPa (100 psi) with an operating range of 0.15-0.7 MPa (22-100 psi) for bore 16. Exceeding 500 mm/s risks damage to the bumper cushion and guide.