The AirTAC Airtac HLQ Dual-Axis Precision Slide Cylinder HLQ8X20SAS is a genuine HLQ slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
The AirTAC HLQ8X20SAS is a double-acting dual-rod slide-table cylinder that combines an air cylinder with a ball-bearing linear guide so the table travels straight with low deflection. The bore 8 single-rail ball-bearing guide is anti-rust and dust-proof, well suited to clean or mildly corrosive settings. Dual rods double the thrust of a single-rod unit, and the floating joint protects the rod from side torque.
The AS adjuster code adds an adjustable rubber stopper on the extension side only, giving tuned cushioning where the table extends outward. This is a genuine AirTAC part with a standard magnet fitted for position sensing; compatible sensor switches are CMSH, DMSH, and EMSH series mounted in the body slots. We confirm thrust, dimensions, and allowable load-moment from the datasheet or on-page table on request.
| Model | Airtac HLQ Dual-Axis Precision Slide Cylinder HLQ8X20SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
Bore 8 delivers light thrust for small-part handling; choose a larger bore for more push. The HLQ ball-bearing guide is the anti-rust, dust-proof option when cross-roller rigidity is not required. Stroke 20 mm is within the standard range for this bore. The AS adjuster provides an adjustable rubber stopper on the extension side, useful when the extension-end impact needs tuning. Thread is PT.
For load, moment, and kinetic-energy confirmation, route the numbers to us so we can check against the published HLQ tables and deflection curves.
Tuned rubber stopper on the extension side suits outward push-and-place motions where the extend impact needs control.
Guide small components into sorting lanes with dust-proof ball-bearing travel at bore 8 thrust levels.
Short 20 mm guided stroke indexes small fixtures or trays between process steps with repeatable positioning.
AS means an adjustable rubber stopper is fitted on the extension side only. The retraction side uses the basic bumper cushion.
Yes. Allowable load, moment, and kinetic-energy values are published as tables and deflection curves for the HLQ sub-family. Contact us to confirm sizing for your application.