Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X30SAS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X30SAS is a genuine HLQ slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X30SAS
The AirTAC HLQ12X30SAS is a double-acting dual-rod slide-table cylinder that integrates an air cylinder with a ball-bearing linear guide for straight travel and low deflection. The dual rod doubles the thrust, and a floating joint prevents side torque on the rod. The HLQ guide is anti-rust and dust-proof, suited to precise guided travel in clean settings.
This is a genuine AirTAC part with a standard magnet for position sensing with CMSH, DMSH, or EMSH switches. We confirm the exact thrust, dimensions, load, and moment values from the datasheet or on-page table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X30SAS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X30SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose this 12mm bore for moderate thrust in a compact slide. The HLQ ball-bearing guide provides anti-rust and dust-proof operation for clean environments. The 30mm stroke is standard for this bore, and the AS adjuster places an adjustable rubber stopper on the extension side only. Ports are PT thread; select G or NPT if needed. Route load and moment sizing to us, as they are published as tables and curves.
Applications
Pick-and-place
Shifts parts with dust-proof precision over a 30mm extension stroke.
Gripper traverse
Moves a small gripper straight with an adjustable stopper on extension.
Assembly stage
Advances a stop or jig into position with anti-rust ball bearings.
FAQ
What does the AS in HLQ12X30SAS mean?
AS indicates an adjustable rubber stopper fitted on the extension side only, allowing you to set the forward end position while the retract end uses the standard bumper.
Is the magnet optional on this slide table?
No, the magnet is standard across the line, enabling position sensing with CMSH, DMSH, or EMSH switches mounted in the body slots.