Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X50SA
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X50SA is a genuine HLQ slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X50SA
The AirTAC HLQ12X50SA is a double-acting dual-rod slide-table cylinder combining an integrated ball-bearing linear guide with an air cylinder. The table moves in a straight line with low deflection, the dual rod doubles thrust output, and a floating joint prevents side torque from reaching the rods. With a 12 mm bore and 50 mm stroke, it delivers moderate thrust for compact guided tasks. The A adjuster code adds adjustable rubber stoppers at both ends for fine-tuned end-position control.
This is a genuine AirTAC part with a standard magnet fitted for position sensing; CMSH, DMSH, and EMSH sensor switches install in the body slots. We confirm exact thrust, dimensions, and allowable load-moment data from the AirTAC datasheet or on-page specification table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X50SA Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X50SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 12 is a solid choice for moderate thrust in a compact form; select a larger bore when more pushing force is needed. The HLQ ball-bearing guide provides anti-rust and dust-proof performance ideal for cleaner or humid settings where HLS cross-roller rigidity is not required. Stroke 50 mm sits within the bore 12 range. The A code means adjustable rubber stoppers at both extension and retraction ends, letting you fine-tune the stop position. Thread is PT. Contact us for load and moment confirmation from the published tables and deflection curves.
Applications
Adjustable Stop Positioning
Uses the adjustable rubber stoppers to fine-tune a 50 mm forward placement of a probe or test head onto electronic components.
Gripper Traverse
Carries a small gripper across 50 mm of ball-bearing guided travel for part pick-up and release in a transfer line.
Assembly Fixture Index
Indexes a fixture 50 mm with adjustable stoppers to set precise end positions for a joining or pressing step.
FAQ
What does the A adjuster code mean on the HLQ12X50SA?
The A code indicates adjustable rubber stoppers at both ends of the stroke, letting you fine-tune the end-of-travel position without adding shock absorbers. This is one of several adjuster options available on HLS and HLQ slide tables for bore 12 and larger.
How do I confirm load and moment capacity for the HLQ12X50SA?
Allowable load, moment, and deflection are published as tables and curves in the AirTAC datasheet. We do not state a single generic figure because capacity varies with mounting orientation and stroke. Contact us and we will confirm the values for your specific application from the official documentation.