Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X50SBS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X50SBS is a genuine HLQ slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X50SBS
The AirTAC HLQ12X50SBS is a ball-bearing slide-table cylinder combining a double-acting dual-rod air cylinder with a precision linear guide in a single body. The ball-bearing guide offers smooth, anti-rust, dust-proof travel, and at bore 12 the double-rail layout adds stability. Dual rods double the thrust, and the floating joint protects the rods from side torque so the table moves straight through the full 50 mm stroke. The BS adjuster places a shock absorber on the extension side to absorb end-of-stroke impact when the table extends.
This is a genuine AirTAC part with a standard sintered magnet for position detection; compatible sensor switches are CMSH, DMSH, and EMSH installed in the body slots. We verify the exact thrust, dimensions, allowable load, and moment figures from the AirTAC datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X50SBS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X50SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 12 gives moderate thrust for small-to-medium workpieces; a larger bore (16 or 20) in the same HLQ family delivers more push if needed, but never cross-reference thrust between sub-families. The 50 mm stroke is a common mid-range choice for bore 12. The HLQ ball-bearing guide is preferred over the HLS cross-roller when anti-rust and dust-proof properties are more important than maximum rigidity. The BS adjuster cushions the extension end only; for both-end shock absorption select a B adjuster.
Allowable load, moment, and deflection vary by bore and stroke and are published as tables and curves; contact us to confirm sizing before ordering.
Applications
Gripper Traverse
Extends a parallel gripper to pick a part from a nest, with the extension-side shock absorber softening the forward stop during fast cycles.
Lane Diverter
Pushes small parts from one conveyor lane to another using the dual-rod thrust and ball-bearing guide for repeatable straight travel.
Stopper Positioning
Advances a retractable stop pin at a packaging station; the BS cushioning protects the pin and product when the table extends under load.
FAQ
How does the BS adjuster differ from BF on the HLQ12X50SBS?
BS places the shock absorber on the extension (forward) side only, while BF places it on the retraction (back) side. Choose BS when the extension stroke carries more momentum, or B for both ends.
Is the magnet optional on this HLQ series slide table?
No. The magnet is standard on every HLQ model; the S in the code confirms a magnet is fitted. Compatible sensor switches are CMSH, DMSH, and EMSH.