Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75S
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75S is a genuine HLQ slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75S
The AirTAC HLQ12X75S is a ball-bearing slide-table cylinder that integrates a double-acting dual-rod air cylinder with a precision linear guide. The ball-bearing guide provides smooth, anti-rust, dust-proof operation, and at bore 12 the double-rail configuration adds load stability. Dual rods double the thrust and a floating joint isolates the rods from side torque so the table travels straight through the full 75 mm stroke. This model uses the basic bumper cushion at both ends with no add-on shock absorber or adjustable stopper.
This is a genuine AirTAC part with a standard sintered magnet for position sensing; CMSH, DMSH, and EMSH sensor switches fit into the body slots. We confirm the exact thrust, dimensions, allowable load, and moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75S Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 12 offers moderate thrust for small-to-medium workpieces; for higher push move up to bore 16 or 20 within the HLQ series without mixing thrust tables across sub-families. The 75 mm stroke gives a longer reach within the bore 12 range and suits applications needing more travel distance. Choose the HLQ ball-bearing guide when anti-rust and dust-proof properties are priorities. This basic model has no adjuster; add an A (adjustable rubber stopper) or B (shock absorber) code if end-cushioning needs to be tuned.
Load, moment, and deflection are published as tables and curves per bore and stroke; contact us for sizing confirmation before ordering.
Applications
Extended Pick-and-Place
Reaches across a 75 mm gap to transfer parts between two fixtures using the ball-bearing guide for smooth straight travel over the longer stroke.
Multi-Stage Transfer
Moves small components through successive processing stations with the dual-rod thrust and dust-proof guide maintaining repeatable positioning.
Sorting Pusher
Pushes sorted small items into divert chutes on a packing line, relying on the anti-rust ball-bearing guide for consistent travel in a humid environment.
FAQ
Why does the HLQ12X75S have no adjuster code in its model number?
The absence of an adjuster code means this model uses the standard bumper cushion at both ends. If you need tunable end-stop or shock absorption, select an A, B, AS, BS, AF, or BF variant within the same bore and stroke.
What load and moment can the HLQ12X75S handle?
Allowable load, moment, and deflection depend on bore, stroke, and mounting orientation and are published as tables and curves in the AirTAC datasheet. Contact us with your application details and we will confirm the values for you.