Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75SAS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75SAS is a genuine HLQ slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75SAS
The AirTAC HLQ12X75SAS is a ball-bearing slide-table cylinder that integrates a dual-rod double-acting air cylinder with a precision linear guide. The 12mm bore at 75mm stroke delivers moderate thrust, while the ball-bearing rail provides smooth, low-deflection straight travel suited to dust-proof and anti-rust environments. A floating joint spares the rods from side torque, and the dual-rod layout doubles the thrust versus a single-rod unit. An adjustable rubber stopper on the extension side lets you fine-tune the forward-end cushioning.
This is a genuine AirTAC part. A magnet is standard for position sensing with CMSH, DMSH, or EMSH switches fitted into the body slots. We confirm exact thrust, dimensions, allowable load, and moment data from the AirTAC datasheet or on-page table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75SAS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 12mm bore is the right choice for moderate-thrust small-parts handling at a 75mm stroke. The HLQ ball-bearing guide excels where anti-rust and dust-proof performance are needed, offering smoother travel and longer service life than a basic guide. Stroke must stay within the bore 12 range listed in the published table. Adjuster code AS places an adjustable rubber stopper on the extension side only, ideal when the forward stroke carries the work and needs controlled stopping. Code A covers both ends; AF covers the retraction side only. Thread is PT as standard; specify G or T for G or NPT ports. We route load, moment, and deflection sizing to the published tables and curves.
Applications
Forward Placement Head
Extension-side rubber stopper cushions the forward push as the slide places a component onto a pallet and retracts freely.
Lateral Part Shuttle
Ball-bearing guided 75mm stroke shuttles parts laterally between stations with precise forward-end stopping and dust-proof guide protection.
Adjustable Feed Stop
Serves as an adjustable feed stop that extends to position a workpiece and uses the AS rubber stopper to set the exact forward limit.
FAQ
What does adjuster code AS mean on the HLQ12X75SAS?
Code AS places an adjustable rubber stopper on the extension side only, giving you end-position cushioning on the forward stroke. Code A covers both ends, and AF covers the retraction side only. B-series shock absorbers are available for higher energy but not on bore 6.
Is the magnet optional on this slide table?
No, the magnet is standard on every HLQ series slide table. Position sensing is done with CMSH, DMSH, or EMSH switches that fit into the magnetic-switch slots on the body.